To catalogue
LNP™ FARADEX™ Compound 9X23246
- Chemical Family
- Acrylonitrile Styrene Acrylate (ASA)Polycarbonate (PC)
LNP™ FARADEX™ Compound 9X23246 is based on polycarbonate/acrylonitrile styrene acrylate (pc/asa) blend, incorporating stainless steel fiber for electrically conductive properties and EMI/RFI shielding. This grade is designed for applications in automotive interiors and electrical components and infrastructure, where these attributes are crucial.
Product families
Applications
Automotive & Transportation — Automotive
- Interior
Product Families
Plastics — Engineering & Specialty Polymers
- Blends & Alloys
Other characteristics
- Brand
- LNP™ FARADEX™ Compound
- Density
- 1230.0 - 1230.0 kg/m³
- Polymer Name
- PC/ASA Alloy
- Flexural Modulus
- 2500.0 - 2500.0 MPa
- Processing Methods
- Injection Molding
- Note
¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. ² Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Automotive & Transportation
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Fillers Included
- Stainless Steel Fiber
- Material Features
- Electrically Conductive
- Electromagnetic Shielding (EMI)
- No Added PFAS
- Radio Frequency Shielding (RFI)
- Plastics and Elastomers End Uses
- Electrical Components
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (at 1 mm/min) ¹ | 2500.0 | MPa | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹ | 45.0 | % | ISO 527 |
| Tensile Nominal Strain (Break, 5 mm/min) ¹ | 5.0 | % | ISO 527 |
| Tensile Stress (Yield, 5 mm/min) ¹ | 53.0 | MPa | ISO 527 |
| Flexural Modulus (at 2 mm/min) ¹ | 2500.0 | MPa | ISO 178 |
| Flexural Strength (2 mm/min) ¹ | 85.0 | MPa | ISO 178 |
| Tensile Modulus (at 5 mm/min) ¹ | 2700.0 | MPa | ASTM D638 |
| Tensile Stress (Yield, Type I, 5 mm/min) ¹ | 53.0 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹ | 6.0 | % | ASTM D638 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹ | 2700.0 | MPa | ASTM D790 |
| Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹ | 90.0 | MPa | ASTM D790 |
Table 2 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹ | 1.23 | g/cm³ | ISO 1183 |
| Specific Gravity ¹ | 1.23 | — | ASTM D792 |
| Mold Shrinkage (flow) ¹ | 0.1 - 0.3 | % | SABIC method |
| Mold Shrinkage (xflow) ¹ | 0.1 - 0.4 | % | SABIC method |
| Moisture Absorption (23°C / 50% RH) ¹ | 0.1 | % | ISO 62 |
| Water Absorption (23°C/ saturated) ¹ | 0.4 | % | ASTM D570 |
Table 3 of 6
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 112.0 | °C | ISO 75/Af |
| Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ | 127.0 | °C | ISO 75/Bf |
| Vicat Softening Temperature (at Rate B/50) ¹ | 132.0 | °C | ISO 306 |
| Vicat Softening Temperature (at Rate B/120) ¹ | 134.0 | °C | ISO 306 |
| Coefficient of Thermal Expansion (at 23°C to 50°C, flow) ¹ | 5.0e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 50°C, xflow) ¹ | 6.0e-05 | 1/°C | ISO 11359-2 |
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 112.0 | °C | ASTM D648 |
| Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹ | 127.0 | °C | ASTM D648 |
Table 4 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistivity ¹ | 1.0E+01 - 1.0E+03 | Ω | ASTM D257 |
| Volume Resistivity ¹ | 1.0E+02 - 1.0E+04 | Ω.cm | ASTM D4496 |
| Shielding Effectivness (at 3mm) ¹ | 50 - 65 | dB | SABIC method |
| Static Decay (at 5000V to <50V) ¹ | max. 0.01 | Seconds | FTMS101B |
Table 5 of 6
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 15.0 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched 80*10*4 -30°C) ¹ | 8.0 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 70.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Unnotched 80*10*4 -30°C) ¹ | 65.0 | kJ/m² | ISO 180/1U |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹ | 13.0 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹ | 60.0 | kJ/m² | ISO 179/1eU |
| Izod Impact (Notched, 23°C) ¹ | 130.0 | J/m | ASTM D256 |
| Izod Impact (Notched, -30°C) ¹ | 85.0 | J/m | ASTM D256 |
| Izod Impact (Unnotched, 23°C) ¹ | 850.0 | J/m | ASTM D4812 |
| Izod Impact (Unnotched, -30°C) ¹ | 850.0 | J/m | ASTM D4812 |
Table 6 of 6
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ² | 100 - 110 | °C |
| Drying Time ² | 2 - 4 | Hrs |
| Drying Time (Cumulative) ² | 8.0 | Hrs |
| Maximum Moisture Content ² | 0.02 | % |
| Melt Temperature ² | 260 - 290 | °C |
| Rear - Zone 1 Temperature ² | 240 - 270 | °C |
| Middle - Zone 2 Temperature ² | 250 - 280 | °C |
| Front - Zone 3 Temperature ² | 260 - 290 | °C |
| Nozzle Temperature ² | 260 - 290 | °C |
| Mold Temperature ² | 60 - 90 | °C |
