LNP™ THERMOCOMP™ Compound RB006

Chemical Family: Polyamides

SABIC's Specialties Business LNP THERMOCOMP RB006 compound is based on Nylon 6/6 resin containing 30% glass bead. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Lawn & Garden
Consumer Goods — Sports & Recreation

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors
Housings & Enclosures
Switches & Relays

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Polyamide 66 (PA 66)
Fillers Included: Glass Bead, Glass Fiber
Glass Bead
Glass Fiber
Flexural Modulus: 4690.0 - 4690.0 MPa
Additives Included: Heat Stabilizer, Mold Release Agent
Heat Stabilizer
Mold Release Agent
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Flame Rating: UL 94 HB
Technology: Plastics
Labeling Claims: No Added PFAS
Material Features: Cost Effective
Good Mold Release
Heat Stabilized
High Stiffness
Low Warpage
No Added PFAS
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Appliances
Building Materials
Cell Phones
Commercial Appliance
Computer Components
Consumer Applications
Containers
Displays
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 7

20 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, 5 mm/min) ¹¹	56	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	80	MPa	ISO 527
Tensile Stress (Break) ¹¹	66	MPa	ASTM D638
Tensile Strain (Break, 5 mm/min) ¹¹	9	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	7.6	%	ISO 527
Tensile Strain (Break) ¹¹	3	%	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	58	MPa	ASTM D638
Tensile Modulus (at 1 mm/min) ¹¹	4500	MPa	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	7280	MPa	ISO 527
Tensile Modulus (at 50 mm/min) ¹¹	4320	MPa	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	6810	MPa	ASTM D638
Flexural Stress (Break, 2 mm/min) ¹¹	130	MPa	ISO 178

Table 2 of 7

9 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.37	g/cm³	ISO 1183
Density ¹¹	1.36	g/cm³	ASTM D792
Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹	1.1 - 1.5	%	SABIC method
Water Absorption (at 23°C, saturated) ¹¹	5.5	%	ISO 62-1
Specific Gravity ¹¹	1.38	—	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.72	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	1 - 3	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1 - 3	%	ASTM D955
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.72	%	ISO 62

Table 3 of 7

10 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	101	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	92	°C	ASTM D648
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.00004	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.00004	1/°C	ISO 11359-2
Vicat Softening Temperature (Rate B/120) ¹¹	253	°C	ISO 306
Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120104, sp=100mm) ¹¹	235	°C	ISO 75/Be
Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120104, sp=100mm) ¹¹	100	°C	ISO 75/Ae
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹	0.000063	1/°C	ASTM D696
Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹	0.000062	1/°C	ASTM D696
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	95	°C	ISO 75/Af

Table 4 of 7

2 rows

Characteristic	Value	Unit	Method
Comparative Tracking Index ¹¹	500	V	IEC 60112
Comparative Tracking Index (M) ¹¹	250	V	IEC 60112

Table 5 of 7