LNP™ THERMOCOMP™ Compound EF006H

Chemical Family: Polyetherimide (PEI)Polyimides (PI)

SABIC's Specialties Business LNP THERMOCOMP EF006H compound is based on Polyetherimide (PEI) resin containing 30% glass fiber. Added features of this grade include: Healthcare. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Healthcare & Pharma — Medical

Medical Devices & Assemblies
Surgical Instruments & Trays

Printing & Packaging — Packaging

Healthcare Packaging
Industrial & Transport Packaging

Electrical & Electronics — Parts & Components

Housings & Enclosures

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Polyether Imide (PEI)
Fillers Included: Glass Fiber
Flexural Modulus: 10340.0 - 10340.0 MPa
Processing Methods: Injection Molding
Note: ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Electrical & Electronics
Healthcare & Pharma
Printing & Packaging
Flame Rating: UL 94 V0
Technology: Plastics
Labeling Claims: No Added PFAS
Material Features: Cost Effective
High Modulus
High Stiffness
High Temperature Resistance
No Added PFAS
Very Good Heat Resistance
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Electrical Enclosure
Electrical Internal Frame
Internal Armature
Medical Devices
Medical Packaging
Medical/Healthcare Applications
Pharmaceutical Packaging
Surgical Devices
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

5 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break) ¹¹	166	MPa	ASTM D638
Tensile Strain (Break) ¹¹	2.3	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	10340	MPa	ASTM D638
Flexural Stress ¹¹	262	MPa	ASTM D790
Flexural Modulus ¹¹	10340	MPa	ASTM D790

Table 2 of 6

1 row

Characteristic	Value	Unit	Method
Density ¹¹	1.52	g/cm³	ASTM D792

Table 3 of 6

4 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	204	°C	ASTM D648
Relative Temperature Index (Electrical) ᵖ ¹¹	105	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	105	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	105	°C	UL 746B

Table 4 of 6

2 rows

Characteristic	Value	Unit	Method
Izod Impact (Unnotched, at 23°C) ¹¹	640	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	85	J/m	ASTM D256

Table 5 of 6

12 rows

Characteristic	Value	Unit
Drying Temperature ⁷	150	°C
Drying Time ⁷	4 - 6	Hrs
Maximum Moisture Content ⁷	0.02	%
Melt Temperature ⁷	360 - 400	°C
Rear - Zone 1 Temperature ⁷	360 - 380	°C
Middle - Zone 2 Temperature ⁷	370 - 390	°C
Front - Zone 3 Temperature ⁷	380 - 400	°C
Nozzle Temperature ⁷	390 - 400	°C
Mold Temperature ⁷	140 - 180	°C
Back Pressure ⁷	0.3 - 0.7	MPa
Screw Speed (Circumferential speed) ⁷	0.2 - 0.3	m/s
Vent Depth ⁷	0.025 - 0.076	mm

Table 6 of 6