LNP™ THERMOCOMP™ Compound AX06472

Chemical Family: Acrylonitrile Butadiene Styrene (ABS)Styrenics

SABIC's Specialties Business LNP™ THERMOCOMP™ AX06472 compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing glass fiber and proprietary fillers. Added features of this grade include: Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications.

Product families

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Interior

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors
Housings & Enclosures
Switches & Relays

Product Families

Plastics — Basic Thermoplastics

Styrenics

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Acrylonitrile Butadiene Styrene (ABS)
Fillers Included: Glass Fiber, Proprietary
Glass Fiber
Proprietary
Processing Methods: Injection Molding, Laser Sintering (SLS)
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Flame Rating: UL 94 HB
Technology: Plastics
Material Features: Cost Effective
Excellent Dielectric Properties
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Automotive Applications
Automotive Interior Parts
Cell Phones
Computer Components
Consumer Applications
Containers
Displays
Electrical Components
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding
Laser Sintering (SLS)

Technical data

Table 1 of 7

5 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	62	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	5930	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	96	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	5380	MPa	ASTM D790

Table 2 of 7

4 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	1.3	—	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.2	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.5	%	ASTM D955

Table 3 of 7

4 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	96	°C	ASTM D648
Relative Temperature Index (Electrical) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	60	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	60	°C	UL 746B

Table 4 of 7

2 rows

Characteristic	Value	Method
Relative Permittivity (1 GHz) ¹¹	3	ASTM D150
Dissipation Factor (at at 1 GHz) ¹¹	0.003	ASTM D150

Table 5 of 7