To catalogue
LNP™ THERMOCOMP™ Compound 6F006I
SABIC's Specialties Business LNP THERMOCOMP 6F006I compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend containing 30% glass fiber. Added features of this grade include: Impact Modified. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Lawn & Garden
- Consumer Goods — Sports & Recreation
Building & Construction — Decorative Materials & Finishes
- Artificial Turf
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
- Displays
Printing & Packaging — Packaging
- Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
- Applicators & Accessories
Electrical & Electronics — Parts & Components
- Connectors
- Housings & Enclosures
- Switches & Relays
Product Families
Plastics — Engineering & Specialty Polymers
- Blends & Alloys
Other characteristics
- Brand
- LNP™ THERMOCOMP™ Compound
- Density
- 1440.0 - 1440.0 kg/m³
- Polymer Name
- PC/PBT Alloy
- Flexural Modulus
- 7750.0 - 7750.0 MPa
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Personal Care
- Printing & Packaging
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Fillers Included
- Glass Fiber
- Additives Included
- Impact Modifier
- Material Features
- Cost Effective
- High Impact Resistance
- High Stiffness
- Impact Modified
- No Added PFAS
- Country Availability
- Canada
- China (Mainland)
- Mexico
- USA
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Building Materials
- Cell Phones
- Computer Components
- Consumer Applications
- Containers
- Displays
- Doors
- Electrical Components
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.44 | g/cm³ | ASTM D792 |
| Melt Flow Rate (at 250°C, 5 kgf) ¹¹ | 24 | g/10 min | ASTM D1238 |
| Melt Volume Rate (at 250°C, 5 kg) ¹¹ | 12 | cm³/10 min | ISO 1133 |
| Melt Volume Rate (at 265°C, 5.0 kg) ¹¹ | 19 | cm³/10 min | ISO 1133 |
| Moisture Absorption (at 23°C, 50% RH) ¹¹ | 0.15 | % | ISO 62 |
| Mold Shrinkage (flow, 0.75-2.3 mm) ᵍ ¹¹ | 0.3 - 0.4 | % | SABIC method |
| Mold Shrinkage (flow, 2.3-4.6 mm) ᵍ ¹¹ | 0.4 - 0.5 | % | SABIC method |
| Mold Shrinkage (xflow, 0.75-2.3 mm) ᵍ ¹¹ | 0.4 - 0.7 | % | SABIC method |
| Mold Shrinkage (xflow, 2.3-4.6 mm) ᵍ ¹¹ | 0.7 - 0.9 | % | SABIC method |
| Specific Gravity ¹¹ | 1.44 | — | ASTM D792 |
| Specific Volume ¹¹ | 0.7 | cm³/g | ASTM D792 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.09 | % | ASTM D570 |
Table 2 of 7
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 5370 | MPa | ASTM D790 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 7750 | MPa | ISO 178 |
| Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹ | 138 | MPa | ASTM D790 |
| Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹ | 150 | MPa | ASTM D790 |
| Flexural Stress (Yield, at 2 mm/min) ¹¹ | 154 | MPa | ISO 178 |
| Hardness (Rockwell R) ¹¹ | 109 | — | ASTM D785 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 8500 | MPa | ISO 527 |
| Tensile Modulus (at 5 mm/min) ¹¹ | 9750 | MPa | ASTM D638 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 3 | % | ISO 527 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 4 | % | ASTM D638 |
| Tensile Strain (Yield, 5 mm/min) ¹¹ | 3 | % | ISO 527 |
| Tensile Strain (Yield, Type I, 5 mm/min) ¹¹ | 3 | % | ASTM D638 |
Table 3 of 7
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ | 0.000027 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ | 0.000027 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ | 0.00011 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ | 0.00011 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 60°C to 138°C, flow) ¹¹ | 0.0000198 | 1/°C | ASTM E831 |
| Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹ | 204 | °C | ASTM D648 |
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 163 | °C | ASTM D648 |
| Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹ | 149 | °C | ASTM D648 |
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 155 | °C | ISO 75/Af |
| Relative Temperature Index (Electrical) ᵖ ¹¹ | 140 | °C | UL 746B |
| Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ | 130 | °C | UL 746B |
| Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ | 140 | °C | UL 746B |
Table 4 of 7
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Strength (in air, at 3.2mm) ¹¹ | 20 | kV/mm | ASTM D149 |
| Dielectric Strength (in oil, at 1.6mm) ¹¹ | 27 | kV/mm | IEC 60243-1 |
| Dissipation Factor (at 100 Hz) ¹¹ | 0.003 | — | ASTM D150 |
| Dissipation Factor (at at 1 MHz) ¹¹ | 0.02 | — | ASTM D150 |
| High Ampere Arc Ignition (PLC 3) ¹¹ | min. 1.5 | mm | UL 746A |
| Hot Wire Ignition (PLC 1) ¹¹ | min. 3 | mm | UL 746A |
| Hot Wire Ignition (PLC 2) ¹¹ | min. 1.5 | mm | UL 746A |
| Relative Permittivity (1 MHz) ¹¹ | 4 | — | ASTM D150 |
| Relative Permittivity (100 Hz) ¹¹ | 4 | — | ASTM D150 |
| Volume Resistivity ¹¹ | 4.80E+15 | Ω.cm | ASTM D257 |
| Comparative Tracking Index (UL, PLC) ¹¹ | 2 | PLC Code | UL 746A |
| High Voltage Arc Track Rate (PLC) ¹¹ | 1 | PLC Code | UL 746A |
Table 5 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹¹ | 9 | kJ/m² | ISO 179/1eA |
| Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹ | 5 | J | ASTM D3763 |
| Instrumented Dart Impact Total Energy (at 23°C) ¹¹ | 17 | J | ASTM D3763 |
| Izod Impact (Notched, 80*10*4, at -30°C) ¹¹ | 6 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 10 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, at -30°C) ¹¹ | 112 | J/m | ASTM D256 |
| Izod Impact (Notched, at 23°C) ¹¹ | 170 | J/m | ASTM D256 |
| Izod Impact (Unnotched, at 23°C) ¹¹ | 640 | J/m | ASTM D4812 |
Table 6 of 7
14 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure ⁷ | 0.3 - 0.3 | MPa |
| Drying Temperature ⁷ | 110 | °C |
| Drying Time (Cumulative) ⁷ | 8 | Hrs |
| Drying Time ⁷ | 4 - 6 | Hrs |
| Front - Zone 3 Temperature ⁷ | 260 - 280 | °C |
| Maximum Moisture Content ⁷ | 0.02 | % |
| Melt Temperature ⁷ | 260 - 280 | °C |
| Middle - Zone 2 Temperature ⁷ | 255 - 275 | °C |
| Mold Temperature ⁷ | 65 - 95 | °C |
| Nozzle Temperature ⁷ | 255 - 275 | °C |
| Rear - Zone 1 Temperature ⁷ | 250 - 270 | °C |
| Screw Speed ⁷ | 50 - 50 | rpm |
Table 7 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized (94HB Flame Class Rating) ᵖ | min. 1.5 | mm | UL 94 |
