LNP™ THERMOCOMP™ Compound 9F005P

Chemical Family: Polycarbonate (PC)

SABIC's Specialties Business LNP™ THERMOCOMP™ 9F005P compound is based on Polycarbonate (PC) resin containing 25% glass fiber. Added features of this grade include: Exceptional Processing, CLTE close to Aluminum.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Lawn & Garden
Consumer Goods — Sports & Recreation

Automotive & Transportation — Automotive

Exterior & Body

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Batteries
Connectors
Housings & Enclosures
Switches & Relays

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics
Polycarbonates

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Polycarbonate (PC)
Fillers Included: Glass Fiber
Flexural Modulus: 7987.0 - 7987.0 MPa
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
Markets: Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Flame Rating: UL 94 HB
Technology: Plastics
Material Features: Cost Effective
Dimensional Stability
Good Processability
High Flowability
High Stiffness
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Automotive Applications
Automotive Exterior Parts
Battery Cases
Building Materials
Cell Phones
Clamp Shell
Computer Components
Consumer Applications
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 7

12 rows

Characteristic	Value	Unit	Method
Melt Flow Rate (at 260°C, 5.0 kgf) ¹¹	56	g/10 min	ASTM D1238
Melt Volume Rate (at 260°C, 5.0 kg) ¹¹	47	cm³/10 min	ISO 1133
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.01	%	ISO 62
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.34 - 0.44	%	ISO 294
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.34 - 0.44	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.53	%	ISO 294
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.53	%	ASTM D955
Specific Gravity ¹¹	1.33	—	ASTM D792
Water Absorption (at 23°C, 24hrs) ¹¹	0.06	%	ASTM D570
Water Absorption (at 23°C, saturated) ¹¹	0.06	%	ISO 62-1
Density ¹¹	1.32	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.01	%	ASTM D570

Table 2 of 7

14 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	130	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	130	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	2	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	8245	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	166	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	7250	MPa	ASTM D790
Tensile Stress (Yield, 5 mm/min) ¹¹	105	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	105	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹¹	2	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	3	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	8277	MPa	ISO 527

Table 3 of 7

11 rows

Characteristic	Value	Unit	Method
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000268	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.0000268	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000567	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.0000567	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.0000247	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹	0.000066	1/°C	ISO 11359-2
Vicat Softening Temperature (Rate B/50) ¹¹	129	°C	ISO 306
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	135	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	130	°C	ASTM D648
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	135	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	130	°C	ISO 75/Af

Table 4 of 7

1 row

Characteristic	Value	Unit	Method
Comparative Tracking Index ¹¹	200	V	IEC 60112

Table 5 of 7

7 rows

Characteristic	Value	Unit	Method
Charpy Impact (at 23°C, Unnotch Edgew 80104 sp=62mm) ¹¹	33	kJ/m²	ISO 179/1eU
Charpy Impact (at 23°C, V-notch Edgew 80104 sp=62mm) ¹¹	9	kJ/m²	ISO 179/1eA
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	27	kJ/m²	ISO 180/1U
Izod Impact (Unnotched, at 23°C) ¹¹	449	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	98	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	7	J	ASTM D3763
Izod Impact (Notched, 80104, at 23°C) ¹¹	9	kJ/m²	ISO 180/1A

Table 6 of 7