LNP™ THERMOCOMP™ Compound MFB82I

Chemical Family: PolyolefinsPolypropylenes (PP)

SABIC's Specialties Business LNP THERMOCOMP MFB82I compound is based on Polypropylene (PP) resin containing 10% glass fiber, 40% glass bead. Added features of this grade include: Improved Impact. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Sports & Recreation

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors
Housings & Enclosures
Switches & Relays

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Polypropylene (unspecified)
Fillers Included: Glass Bead, Glass Fiber
Glass Bead
Glass Fiber
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Flame Rating: UL 94 HB
Technology: Plastics
Labeling Claims: No Added PFAS
Material Features: Cost Effective
High Ductility
High Impact Resistance
High Stiffness
Low Warpage
No Added PFAS
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Appliances
Cell Phones
Computer Components
Consumer Applications
Containers
Displays
Electrical Components
Electrical Enclosure
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

5 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, 5 mm/min) ¹¹	50	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	3.5	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	4500	MPa	ISO 527
Flexural Stress (Break, 2 mm/min) ¹¹	58	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	3800	MPa	ISO 178

Table 2 of 6

2 rows

Characteristic	Value	Unit	Method
Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹	0.1 - 0.3	%	SABIC method
Density ¹¹	1.32	g/cm³	ISO 1183

Table 3 of 6

6 rows

Characteristic	Value	Unit	Method
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹	0.000037	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹	0.000125	1/°C	ISO 11359-2
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	133	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	65	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	65	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	65	°C	UL 746B

Table 4 of 6