LNP™ THERMOCOMP™ Compound AX04518

Name: LNP™ THERMOCOMP™ Compound AX04518
Brand: LNP™ THERMOCOMP™ Compound

LNP THERMOCOMP AX04518 compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 20% glass fiber.

Product families

Building & Construction — Building Materials

Electrical & Electronics — Devices & Assemblies

Printing & Packaging — Packaging

Electrical & Electronics — Parts & Components

Plastics — Basic Thermoplastics

Brand: LNP™ THERMOCOMP™ Compound
Polymer Name: Acrylonitrile Butadiene Styrene (ABS)
Fillers Included: Glass Fiber
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Printing & Packaging
Technology: Plastics
Material Features: Cost Effective
High Modulus
High Stiffness
Country Availability: Canada
China (Mainland)
Mexico
USA
Plastics and Elastomers End Uses: Appliances
Building Materials
Consumer Applications
Electrical Enclosure
Electrical Internal Frame
Food Packaging
Home Appliances
Hoses
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

15 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	78	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	78	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	1.8	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	1.8	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	6750	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	112	MPa	ASTM D790
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	110	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	6260	MPa	ASTM D790
Tensile Stress (Yield, 5 mm/min) ¹¹	74	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	74	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹¹	1.7	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	1.7	%	ISO 527

6 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.21	g/cm³	ISO 1183
Density ¹¹	1.21	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.67	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.4 - 0.6	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.6 - 0.8	%	ASTM D955
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.4	%	ISO 62

6 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	119	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	114	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹	0.00006	1/°C	ASTM D696
Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹	0.000069	1/°C	ASTM D696
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	120	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	115	°C	ISO 75/Af

6 rows

Characteristic	Value	Unit	Method
Izod Impact (Unnotched, at 23°C) ¹¹	269	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	51	J/m	ASTM D256
Multi-Axial Impact ¹¹	2	J	ISO 6603
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	8	J	ASTM D3763
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	15	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80104, at 23°C) ¹¹	5	kJ/m²	ISO 180/1A

10 rows