LNP™ THERMOCOMP™ Compound D251RCC

Chemical Family: Polycarbonate (PC)

SABIC's Specialties Business LNP™ THERMOCOMP™ D251RCC compound is based on recycled Polycarbonate (PC) resin containing 20% glass fiber. Added features of this grade include: Colorable, High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant. Post-Consumer Recycling (PCR) Polycarbonate content up to 40%

Other characteristics

Brand: LNP™ THERMOCOMP™ Compound
Density: 1370.0 - 1370.0 kg/m³
Polymer Name: Polycarbonate (PC)
Labeling Claims: Bromine-free, Chlorine-free, Contains PCR Resin, Recyclable, Recycled, Sustainable; Bromine-free; Chlorine-free; Contains PCR Resin; Recyclable; Recycled; Sustainable
Fillers Included: Glass Fiber, Silicone Oil
Glass Fiber
Silicone Oil
Additives Included: Flame Retardant, Heat Stabilizer, Mold Release Agent; Flame Retardant; Heat Stabilizer; Mold Release Agent
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Flame Rating: UL 94 V0
Technology: Plastics
Material Features: Cost Effective
Flame Retardant
Good Aesthetics
Good Mold Release
Heat Stabilized
High Ductility
High Impact Resistance
High Modulus
Country Availability: Canada
China (Mainland)
Mexico
USA
Potential Applications: PC based LNP THERMOCOMP™ compounds may be qualified to use in consumer electronics, industrial applications for combination of dimensional stability, thin wall and non-Br/Cl Eco FR systems.

Technical data

Table 1 of 7

10 rows

Characteristic	Value	Unit	Method
Tensile Modulus (at 5 mm/min) ¹¹	6650	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	100	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2.9	%	ASTM D638
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	6300	MPa	ASTM D790
Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹	161	MPa	ASTM D790
Tensile Modulus (at 1 mm/min) ¹¹	6750	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	108	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	3.1	%	ISO 527
Flexural Modulus (at 2 mm/min) ¹¹	6100	MPa	ISO 178
Flexural Strength (at 2 mm/min) ¹¹	157	MPa	ISO 178

Table 2 of 7

8 rows

Characteristic	Value	Unit	Method
Density ¹¹	1.37	g/cm³	ASTM D792
Melt Flow Rate (at 300°C, 2.16 kgf) ¹¹	31	g/10 min	ASTM D1238
Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹	16	g/10 min	ASTM D1238
Melt Volume Rate (at 300°C, 2.16 kg) ¹¹	27	cm³/10 min	ISO 1133
Melt Volume Rate (at 300°C, 1.2 kg) ¹¹	13	cm³/10 min	ISO 1133
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.2 - 0.4	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.2 - 0.4	%	ASTM D955
Water Absorption (at 23°C, 24hrs) ¹¹	0.03	%	ISO 62-1

Table 3 of 7

6 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	114	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	119	°C	ASTM D648
Vicat Softening Temperature (Rate B/50) ¹¹	122	°C	ISO 306
Vicat Softening Temperature (Rate B/120) ¹¹	125	°C	ISO 306
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.000025	1/°C	ASTM E831
Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹	0.000074	1/°C	ASTM E831

Table 4 of 7

8 rows

Characteristic	Value	Method
Dielectric Constant (at 1.1 GHz) ¹¹	3.21	SABIC method
Dielectric Constant (at 1.9 GHz) ¹¹	3.22	SABIC method
Dielectric Constant (at 5 GHz) ¹¹	3.22	SABIC method
Dielectric Constant (at 10 GHz) ¹¹	3.22	SABIC method
Dissipation Factor (at 1.1 GHz) ¹¹	0.0064	SABIC method
Dissipation Factor (at 1.9 GHz) ¹¹	0.0065	SABIC method
Dissipation Factor (at 5 GHz) ¹¹	0.0067	SABIC method
Dissipation Factor (at 10 GHz) ¹¹	0.0069	SABIC method

Table 5 of 7

7 rows

Characteristic	Value	Unit	Method
Izod Impact (Notched, at 23°C) ¹¹	139	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	94	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	616	J/m	ASTM D4812
Izod Impact (Notched, 80104, at 23°C) ¹¹	12	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80104, at -30°C) ¹¹	9	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	38	kJ/m²	ISO 180/1U
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	24	J	ASTM D3763

Table 6 of 7

11 rows

Characteristic	Value	Unit
Drying Temperature ⁷	110	°C
Drying Time ⁷	3 - 6	Hrs
Maximum Moisture Content ⁷	0.02	%
Melt Temperature ⁷	285 - 310	°C
Nozzle Temperature ⁷	285 - 305	°C
Front - Zone 3 Temperature ⁷	280 - 300	°C
Middle - Zone 2 Temperature ⁷	270 - 290	°C
Rear - Zone 1 Temperature ⁷	260 - 280	°C
Mold Temperature ⁷	80 - 110	°C
Back Pressure ⁷	0.1 - 0.3	MPa
Screw Speed ⁷	50 - 90	rpm

Table 7 of 7

1 row

Characteristic	Value	Unit	Method
UL Recognized (94V-0 Flame Class Rating) ᵖ	min. 0.6	mm	UL 94