LNP™ VERTON™ Compound RVL36
- Chemical Family
- Polyamides
LNP™ VERTON™ Compound RVL36 combines Polyamide 66 (nylon 66) resin with 30% long glass fiber and 15% PTFE, offering exceptional wear resistance and structural integrity. This compound is engineered to withstand abrasive conditions and mechanical stresses, making it ideal for applications requiring durable and reliable performance. The incorporation of PTFE enhances the material's ability to resist friction and wear, ensuring longevity and reduced maintenance requirements in various industrial and automotive components. This product maintains ease of processing during injection molding, facilitating efficient manufacturing of complex shapes and precise components while meeting stringent performance standards for demanding applications.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Exterior & Body
- Structural Components
- Equipment & Parts
- Industrial Automation
Product Families
- Polyamides
Other characteristics
- Brand
- LNP™ VERTON™ Compound
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Glass Fiber, PTFE
- Glass Fiber
- PTFE
- Flexural Modulus
- 8900.0 - 8900.0 MPa
- Processing Methods
- Injection Molding
- Note
(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.,The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (3) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Material Features
- High Ductility
- High Stiffness
- High Strength
- Wear Resistant
- Plastics and Elastomers End Uses
- Automotive Exterior Parts
- Building Materials
- Commercial Appliance
- Gears
- Home Appliances
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, 5 mm/min) ¹ | 185.0 | MPa | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹ | 2.9 | % | ISO 527 |
| Flexural Stress (Yield, 2 mm/min) ¹ | 265.0 | MPa | ISO 178 |
| Flexural Strain (Break, 2 mm/min) ¹ | 3.3 | % | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹ | 8900.0 | MPa | ISO 178 |
| Flexural Strain (Break, 2 mm/min, 60°C) ¹ | 3.9 | % | ISO 178 |
| Flexural Strain (Break, 2 mm/min), 100°C ¹ | 4.0 | % | ISO 178 |
| Flexural Strain (Break, 2 mm/min, 150°C) ¹ | 3.6 | % | ISO 178 |
| Flexural Strain (Break, 2 mm/min, 200°C) ¹ | 3.4 | % | ISO 178 |
| Flexural Stress (Yield, 2 mm/min, 60°C) ¹ | 208.0 | MPa | ISO 178 |
| Flexural Stress (Yield, 2 mm/min, 100°C) ¹ | 155.0 | MPa | ISO 178 |
| Flexural Stress (Yield, 2 mm/min, 150°C) ¹ | 129.0 | MPa | ISO 178 |
Table 2 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mold Shrinkage (flow, 24 hrs) ² | 0.25 | % | ISO 294 |
| Mold Shrinkage (xflow, 24 hrs) ² | 0.69 | % | ISO 294 |
| Wear Factor Washer ¹ | 12.0 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Density ¹ | 1.53 | g/cm³ | ISO 1183 |
| Water Absorption (23°C/24hrs) ¹ | 1.37 | % | ISO 62-1 |
| Moisture Absorption (23°C / 50% RH) ¹ | 0.4 | % | ISO 62 |
Table 3 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Heat ¹ | 1846.0 | J/kg-K | ASTM E1269 |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 258.0 | °C | ISO 75/Af |
| Thermal Conductivity ¹ | 0.25 | W/m-K | ASTM D5930 |
Table 4 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched 80*10*3 -40°C) ¹ | 15.0 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 54.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Unnotched 80*10*4 -40°C) ¹ | 50.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 16.0 | kJ/m² | ISO 180/1A |
Table 5 of 5
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ³ | 80.0 | °C |
| Drying Time ³ | 4.0 | Hrs |
| Maximum Moisture Content ³ | 0.15 - 0.25 | % |
| Melt Temperature ³ | 290 - 305 | °C |
| Front - Zone 3 Temperature ³ | 290 - 300 | °C |
| Middle - Zone 2 Temperature ³ | 290 - 300 | °C |
| Rear - Zone 1 Temperature ³ | 280 - 295 | °C |
| Mold Temperature ³ | 95 - 110 | °C |
| Back Pressure ³ | 0.2 - 0.3 | MPa |
| Screw Speed ³ | 30 - 60 | rpm |
