To catalogue
ULTEM™ Resin 9075
SABIC's Specialties Business ULTEM™ Resin 9075 is a high flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- ULTEM™ Resin
- Polymer Name
- Polyether Imide (PEI)
- Additives Included
- Flame Retardant
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Industrial
- Availability
ULTEM™ resin is available in transparent and opaque custom colors, and can be glass filled for added stiffness.
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Labeling Claims
- Bio-based
- Confirms to ECO-Label
- Low Toxicity
- No Added PFAS
- Sustainable
- Quality Standards
- FAR 25.853
- OSU 65/65
- Material Features
- Amorphous
- Chemical Resistant
- Dimensional Stability
- Flame Retardant
- Good Adhesion
- Good Mechanical Properties
- High Flow
- High Flowability
Technical data
Table 1 of 7
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Taber Abrasion (CS-17, 1 kg) | 15 | mg/1000cy | SABIC method |
| Tensile Stress (Yield, Type I, 5 mm/min) | 96 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) | 85 | % | ASTM D638 |
| Tensile Stress (Yield, 50 mm/min) | 90 | MPa | ISO 527 |
| Tensile Modulus (at 5 mm/min) | 3300 | MPa | ASTM D638 |
| Tensile Stress (Break, 50 mm/min) | 75 | MPa | ISO 527 |
| Flexural Stress (Yield, 2.6 mm/min, 100 mm span) | 144 | MPa | ASTM D790 |
| Tensile Strain (Yield, 50 mm/min) | 6 | % | ISO 527 |
| Flexural Stress (Break, 2.6 mm/min, 100 mm span) | 141 | MPa | ASTM D790 |
| Tensile Strain (Break, 50 mm/min) | 25 | % | ISO 527 |
| Flexural Modulus (at 2.6 mm/min, 100 mm span) | 3240 | MPa | ASTM D790 |
| Tensile Modulus (at 1 mm/min) | 3200 | MPa | ISO 527 |
Table 2 of 7
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Halogen Content | 0 | % | SABIC method |
| Mold Shrinkage (flow, 3.2 mm) | 0.5 - 0.7 | % | SABIC method |
| Mold Shrinkage (xflow, 3.2 mm) | 0.5 - 0.7 | % | SABIC method |
| Specific Gravity | 1.3 | — | ASTM D792 |
| Melt Flow Rate (at 295°C, 6.6 kgf) | 2.4 | g/10 min | ASTM D1238 |
| Mold Shrinkage (on Tensile Bar, flow) | 0.6 - 0.8 | % | SABIC method |
| Density | 1.32 | g/cm³ | ISO 1183 |
| Water Absorption (at 23°C, saturated) | 1.25 | % | ISO 62-1 |
| Moisture Absorption (at 23°C, 50% RH) | 0.7 | % | ISO 62 |
| Melt Volume Rate (at 340°C, 5.0 kg) | 15 | cm³/10 min | ISO 1133 |
Table 3 of 7
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) | 188 | °C | ASTM D648 |
| Thermal Conductivity | 0.26 | W/m-°C | ISO 8302 |
| Coefficient of Thermal Expansion (at 23°C to 150°C, flow) | 0.00005 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 150°C, xflow) | 0.00005 | 1/°C | ISO 11359-2 |
| Ball Pressure Test (at 123°C to 127°C) | Pass | — | IEC 60695-10-2 |
| Vicat Softening Temperature (Rate A/50) | 210 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/50) | 200 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/120) | 200 | °C | ISO 306 |
| Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) | 200 | °C | ISO 75/Be |
| Heat Deflection Temperature/Ae (at 1.8 Mpa, Edgew 120*10*4, sp=100mm) | 185 | °C | ISO 75/Ae |
Table 4 of 7
13 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature | 130 - 140 | °C |
| Drying Time | 4 - 6 | Hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 295 - 330 | °C |
| Adapter Temperature | 285 - 335 | °C |
| Barrel - Zone 1 Temperature | 280 - 300 | °C |
| Barrel - Zone 2 Temperature | 295 - 320 | °C |
| Barrel - Zone 3 Temperature | 305 - 330 | °C |
| Barrel - Zone 4 Temperature | 310 - 335 | °C |
| Calibrator 2 Temperature | 90 - 130 | °C |
| Calibrator Temperature | 140 - 170 | °C |
| Die Temperature | 275 - 330 | °C |
Table 5 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, at 23°C) | 69 | J/m | ASTM D256 |
| Izod Impact (Reverse Notched, 3.2 mm) | 2082 | J/m | ASTM D256 |
| Color (at 23°C) | 35 | J | ASTM D3029 |
| Izod Impact (Notched, 80*10*4, at 23°C) | 7 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at -30°C) | 5 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) | 7 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) | 6 | kJ/m² | ISO 179/1eA |
Table 6 of 7
15 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature | 135 - 145 | °C |
| Drying Time | 4 - 6 | Hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 350 - 370 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Drying Time (Cumulative) | 10 | Hrs |
| Front - Zone 3 Temperature | 350 - 370 | °C |
| Middle - Zone 2 Temperature | 345 - 365 | °C |
| Mold Temperature | 135 - 165 | °C |
| Nozzle Temperature | 350 - 370 | °C |
| Rear - Zone 1 Temperature | 340 - 360 | °C |
| Screw Speed | 40 - 70 | rpm |
Table 7 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| FAA Flammability (FAR 25.853 A/B) | SECT A-1 | — | FAR 25.853 |
| OSU Total Heat Release Rate (2-minute test) | 10 | kW-min/m² | FAR 25.853 |
| Vertical Burn A (at 60s, passes) | 1 | Seconds | FAR 25.853 |
| Vertical Burn B (at 12s, passes) | 0 | Seconds | FAR 25.853 |
| UL Compliant (94V-0 Flame Class Rating) | 1.6 | mm | UL 94 by SABIC-IP |
| OSU Peak Heat Release Rate (5-minute test) | 16 | kW/m² | FAR 25.853 |
| Glow Wire Flammability Index (passes at 960°C) | 3.2 | mm | IEC 60695-2-12 |
