NORYL™ Resin PPO534

Name: NORYL™ Resin PPO534
Brand: NORYL™ Resin

SABIC's Specialties Business NORYL PPO534 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This high heat injection moldable grade exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for compounding applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Electrical & Electronics — Parts & Components

Connectors
Switches & Relays

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Other characteristics

Brand: NORYL™ Resin
Density: 1080.0 - 1080.0 kg/m³
Polymer Name: PPO/PS Alloy
Flexural Modulus: 2590.0 - 2590.0 MPa
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
Markets: Electrical & Electronics
Flame Rating: UL 94 V1
Technology: Plastics
Labeling Claims: No Added PFAS
Material Features: Amorphous
Dimensional Stability
High Hydrolytic Stability
Low Moisture Absorption
Low Shrinkage
Low Specific Gravity
Low Warpage
No Added PFAS
Country Availability: China (Mainland)
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Connectors
Electrical Components
Electrical/Electronic Applications
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 7

5 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield) ¹¹	72	MPa	SABIC - Japan Method
Tensile Strain (Break) ¹¹	55	%	SABIC - Japan Method
Flexural Stress ¹¹	104	MPa	ASTM D790
Flexural Modulus ¹¹	2590	MPa	ASTM D790
Hardness (Rockwell R) ¹¹	123	—	ASTM D785

Table 2 of 7

3 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	1.08	—	ASTM D792
Water Absorption (at 23°C, 24hrs) ¹¹	0.03	%	ASTM D570
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.6 - 0.8	%	SABIC method

Table 3 of 7

2 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	160	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C) ¹¹	0.00005	1/°C	TMA

Table 4 of 7