NORYL™ Resin NF1520

Name: NORYL™ Resin NF1520
Brand: NORYL™ Resin

NORYL NF1520 is a compound based on PPE+PS resin containing 20% Glass Fiber and 15% PTFE. Added feature of this grade is Wear Resistant.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Stationery
Art & Office Supplies

Automotive & Transportation — Automotive

Chassis & Brake

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Other characteristics

Brand: NORYL™ Resin
Density: 1340.0 - 1340.0 kg/m³
Polymer Name: PPO/PS Alloy
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁿ Tensile Stiffness (K) is a structural property defined as the stress/strain in the linear region of the stress/strain curve. Value depends on the geometry/shape and boundary/surrounding conditions.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Flame Rating: UL 94 HB
Technology: Plastics
Fillers Included: Glass Fiber
PTFE
Additives Included: Flame Retardant
Lubricant (PTFE)
Material Features: Flame Retardant
Non-brominated
Non-chlorinated
Wear Resistant
Country Availability: Brazil
Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Cell Phones
Chassis
Computer Components
Displays
Electrical/Electronic Applications
Optical Box
Printer
Printer Copier
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

8 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	74	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	74	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	4.2	%	ASTM D638
Flexural Stress (Yield, 2.6 mm/min, 100 mm span) ¹¹	101	MPa	ASTM D790
Flexural Modulus (at 2.6 mm/min, 100 mm span) ¹¹	5300	MPa	ASTM D790
K-factor (xE-10, PV=2000 psi-fpm vs Steel) ¹¹	73	—	SABIC method
Coefficient of Friction (on steel, Static) ¹¹	0.3	—	ASTM D1894
Coefficient of Friction (on steel, Kinetic) ¹¹	0.46	—	ASTM D1894

Table 2 of 6

3 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	1.34	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.15 - 0.25	%	SABIC method
Mold Shrinkage (xflow, 3.2 mm) ᵍ ¹¹	0.25 - 0.45	%	SABIC method

Table 3 of 6

4 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	102	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	96	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹	105	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	99	°C	ASTM D648

Table 4 of 6