LNP™ ELCRIN™ WF006LXDiQ
- Chemical Family
- Polyesters
SABIC's Specialties Business LNP ELCRIN WF006LXDiQ is based on an environmentally responsible and sustainable low carbon footprint resin. This grade contains a minimum of 37% PCR weight content. It is a glass fiber reinforced iQ PBT resin with excellent strength, stiffness, dimensional stability and heat resistance. Material may be suited for applications where food contact compliance is required. Restrictions may apply – please request a food contact declaration for details. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Housewares
- Consumer Goods — Sports & Recreation
- Interior
- Consumer Electronics
- Displays
- Food & Beverage Packaging
- Industrial & Transport Packaging
- Non-Food Consumer Packaging
- Applicators & Accessories
Product Families
- Recycled Polymers
- Polyesters & Copolyesters
Other characteristics
- Brand
- LNP™ ELCRIN
- Density
- 1550.0 - 1550.0 kg/m³
- Polymer Name
- Polybutylene Terephthalate (PBT)
- Labeling Claims
Contains PCR Resin, Food Contact Acceptable, No Added PFAS, Recyclable, Recycled, Sustainable; Contains PCR Resin; Food Contact Acceptable; No Added PFAS; Recyclable; Recycled; Sustainable
- Fillers Included
- Glass Fiber
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Personal Care
- Printing & Packaging
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Dimensional Stability
- Excellent Strength
- Food Contact Acceptable
- High Stiffness
- High Strength
- Low BPA Content
- Low Extractables
- Country Availability
- Canada
- China (Mainland)
- Mexico
- USA
- Plastics and Elastomers End Uses
- Appliances
- Automotive Applications
- Automotive Interior Parts
- Cell Phones
- Commercial Appliance
- Computer Components
- Consumer Applications
- Containers
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break, Type I, 5 mm/min) ¹¹ | 145 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 3 | % | ASTM D638 |
| Tensile Modulus (at 5 mm/min) ¹¹ | 10500 | MPa | ASTM D638 |
| Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹ | 205 | MPa | ASTM D790 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 8600 | MPa | ASTM D790 |
| Tensile Stress (Break, 5 mm/min) ¹¹ | 150 | MPa | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 3 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 10500 | MPa | ISO 527 |
| Flexural Strength (at 2 mm/min) ¹¹ | 210 | MPa | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 9000 | MPa | ISO 178 |
Table 2 of 5
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity ¹¹ | 1.55 | — | ASTM D792 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | max. 0.1 | % | ASTM D570 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | max. 0.1 | % | ISO 62-1 |
| Water Absorption (at 23°C, saturated) ¹¹ | 0.6 | % | ISO 62-1 |
| Water Absorption (at 23°C, saturated) ¹¹ | 0.6 | % | ASTM D570 |
| Density ¹¹ | 1.55 | g/cm³ | ISO 1183 |
| Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹ | max. 0.1 | % | ISO 62-4 |
| Moisture Absorption (at 23°C, 50% RH, Equilibrium) ¹¹ | max. 0.2 | % | ISO 62-4 |
| Melt Volume Rate (at 250°C, 5 kg) ¹¹ | 35 | cm³/10 min | ISO 1133 |
| Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹ | 0.2 - 0.4 | % | SABIC method |
| Mold Shrinkage (xflow, 3.2 mm) ᵍ ¹¹ | 1 - 1.4 | % | SABIC method |
Table 3 of 5
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 218 | °C | ASTM D648 |
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 207 | °C | ASTM D648 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 200 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 200 | °C | ASTM D1525 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 200 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 200 | °C | ASTM D1525 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹ | 0.000027 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹ | 0.000027 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹ | 0.00014 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹ | 0.00014 | 1/°C | ASTM E831 |
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 218 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 205 | °C | ISO 75/Af |
Table 4 of 5
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, at 23°C) ¹¹ | 630 | J/m | ASTM D4812 |
| Izod Impact (Unnotched, at -30°C) ¹¹ | 600 | J/m | ASTM D4812 |
| Izod Impact (Notched, at 23°C) ¹¹ | 73 | J/m | ASTM D256 |
| Izod Impact (Notched, at -30°C) ¹¹ | 74 | J/m | ASTM D256 |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 49 | kJ/m² | ISO 180/1U |
| Izod Impact (Unnotched, 80*10*4, at -30°C) ¹¹ | 4.10E+01 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 8 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at -30°C) ¹¹ | 8 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | 54 | kJ/m² | ISO 179/1eU |
| Charpy Impact (at -30°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | 48 | kJ/m² | ISO 179/1eU |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 8 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 9 | kJ/m² | ISO 179/1eA |
Table 5 of 5
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 120 | °C |
| Drying Time ⁷ | 2 - 4 | Hrs |
| Drying Time (Cumulative) ⁷ | 12 | Hrs |
| Maximum Moisture Content ⁷ | 0.05 | % |
| Melt Temperature ⁷ | 240 - 265 | °C |
| Nozzle Temperature ⁷ | 250 - 260 | °C |
| Front - Zone 3 Temperature ⁷ | 260 - 270 | °C |
| Middle - Zone 2 Temperature ⁷ | 245 - 255 | °C |
| Rear - Zone 1 Temperature ⁷ | 220 - 230 | °C |
| Mold Temperature ⁷ | 65 - 90 | °C |
| Back Pressure ⁷ | 0.2 - 0.3 | MPa |
| Screw Speed ⁷ | 30 - 60 | rpm |
