LNP™ ELCRIN™ 6XEUIQ2RCC
- Chemical Family
- Polycarbonate (PC)Polyethylene Terephthalate (PET)
LNP™ ELCRIN™ 6XEUIQ2RCC (also known as ELCRIN ER011567) is based on polycarbonate (pc) and polybutylene terephthalate (pbt) alloy, utilizing iQ PBT generation 2 technology with a minimum of 42% post-consumer recycled (PCR) content. This material offers excellent low-temperature impact strength, good surface esthetics, and good chemical resistance.
Product families
Applications
- Consumer Goods — Sports & Recreation
- Chassis & Brake
- Exterior & Body
- Interior
- Other Building Materials
- Consumer Electronics
Product Families
- Blends & Alloys
Other characteristics
- Brand
- LNP™ ELCRIN
- Density
- 1200.0 - 1200.0 kg/m³
- Polymer Name
- PC/PBT Alloy
- Flexural Modulus
- 2108.0 - 2108.0 MPa
- Processing Methods
- Injection Molding
- Note
¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. ² Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. ³ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Sustainable
- Material Features
- Chemical Resistant
- Good Aesthetics
- Good Impact Strength
- Good Weather Stability
- High Flow
- Low Temperature Impact Resistance
- No Added PFAS
- UV Stabilized
- Plastics and Elastomers End Uses
- Automotive Exterior Parts
- Building Materials
- Commercial Appliance
- Computer Components
- Personal Accessories
- Tablets
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield, Type I, 50 mm/min) ¹ | 55.0 | MPa | ASTM D638 |
| Tensile Strain (Yield, Type I, 50 mm/min) ¹ | 5.0 | % | ASTM D638 |
| Tensile Stress (Break, Type I, 50 mm/min) ¹ | 58.0 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 50 mm/min) ¹ | 145.0 | % | ASTM D638 |
| Tensile Modulus (at 50 mm/min) ¹ | 2071.0 | MPa | ASTM D638 |
| Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹ | 85.0 | MPa | ASTM D790 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹ | 2080.0 | MPa | ASTM D790 |
| Tensile Stress (Yield, 50 mm/min) ¹ | 54.0 | MPa | ISO 527 |
| Tensile Strain (Break, 50 mm/min) ¹ | 139.0 | % | ISO 527 |
| Tensile Stress (Break, 50 mm/min) ¹ | 52.0 | MPa | ISO 527 |
| Tensile Strain (Yield, 50 mm/min) ¹ | 4.0 | % | ISO 527 |
| Flexural Modulus (at 2 mm/min) ¹ | 2108.0 | MPa | ISO 178 |
Table 2 of 5
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity ¹ | 1.2 | — | ASTM D792 |
| Density ¹ | 1.2 | g/cm³ | ISO 1183 |
| Melt Flow Rate (at 250°C/5.0 kgf)¹ | 16.0 | g/10 min | ASTM D1238 |
| Melt Volume Rate (at 250°C/5 kg) ¹ | 15.0 | cm³/10 min | ASTM D1238 |
| Moisture Absorption (23°C/50% RH/24 hrs) ¹ | 0.06 | % | ASTM D570 |
| Water Absorption (23°C/24hrs) ¹ | 0.11 | % | ASTM D570 |
| Mold Shrinkage (flow) ² | 0.8 | % | SABIC method |
Table 3 of 5
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature ¹ | 217.0 | °C | ISO 11357-3 |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 79.0 | °C | ISO 75/Af |
| Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ | 101.0 | °C | ISO 75/Bf |
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 82.0 | °C | ASTM D648 |
| Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹ | 103.0 | °C | ASTM D648 |
| Vicat Softening Temperature (at Rate B/50) ¹ | 115.0 | °C | ASTM D1525 |
| Vicat Softening Temperature (at Rate B/120) ¹ | 116.0 | °C | ASTM D1525 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 8.4e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 8.7e-05 | 1/°C | ASTM E831 |
Table 4 of 5
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 50.0 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched 80*10*4 0°C) ¹ | 50.0 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched 80*10*4 -40°C) ¹ | 23.0 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹ | 56.0 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 0°C, V-notch Edgew 80*10*4 sp=62mm) ¹ | 53.0 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at -40°C, V-notch Edgew 80*10*4 sp=62mm) ¹ | 21.0 | kJ/m² | ISO 179/1eA |
| Izod Impact (Notched, 23°C) ¹ | 658.0 | J/m | ASTM D256 |
| Izod Impact (Notched, 0°C) ¹ | 639.0 | J/m | ASTM D256 |
| Izod Impact (Notched, -40°C) ¹ | 278.0 | J/m | ASTM D256 |
| Instrumented Dart Impact Total Energy (at 23°C) ¹ | 60.0 | J | ASTM D3763 |
| Instrumented Dart Impact Energy (at peak, 23°C) ¹ | 52.0 | J | ASTM D3763 |
| Instrumented Dart Impact Peak Force (at 23°C) ¹ | 4850.0 | N | ASTM D3763 |
Table 5 of 5
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mold Shrinkage (xflow) ² | 0.8 | % | SABIC method |
| Drying Temperature ³ | 110.0 | °C | — |
| Drying Time ³ | 4 - 6 | Hrs | — |
| Drying Time (Cumulative) ³ | 8.0 | Hrs | — |
| Maximum Moisture Content ³ | 0.02 | % | — |
| Melt Temperature ³ | 245 - 270 | °C | — |
| Nozzle Temperature ³ | 245 - 270 | °C | — |
| Front - Zone 3 Temperature ³ | 245 - 270 | °C | — |
| Middle - Zone 2 Temperature ³ | 245 - 270 | °C | — |
| Rear - Zone 1 Temperature ³ | 245 - 270 | °C | — |
| Mold Temperature ³ | 65 - 90 | °C | — |
| Back Pressure ³ | 0.3 - 0.7 | MPa | — |
