LNP™ ELCRIN™ WF006JiQ

Chemical Family: Polyesters

SABIC's Specialties Business LNP ELCRIN WF006JiQ compound is based on Polybutylene terephthalate (PBT) resin utilizing ELCRIN iQ upcycling technology containing minimum 37% Post-Consumer Recycling (PCR) weight content and 30% glass fiber. Added features of this grade include: Biocompatible (ISO10993), Low Extractables, Healthcare, Excellent Strength, Stiffness and Dimensional Stability. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Other characteristics

Brand: LNP™ ELCRIN
Density: 1540.0 - 1540.0 kg/m³
Polymer Name: Polybutylene Terephthalate (PBT)
Labeling Claims: Biocompatible, Contains PCR Resin, Food Contact Acceptable, No Added PFAS, Recyclable, Recycled, Sustainable; Biocompatible; Contains PCR Resin; Food Contact Acceptable; No Added PFAS; Recyclable; Recycled; Sustainable
Fillers Included: Glass Fiber
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Healthcare & Pharma
Printing & Packaging
Flame Rating: UL 94 5VA
UL 94 V0
Technology: Plastics
Material Features: Biocompatible
Chemical Resistant
Dimensional Stability
Excellent Strength
Food Contact Acceptable
High Stiffness
High Strength
Low Extractables
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: FDA Compliant
Plastics and Elastomers End Uses: Appliances
Building Materials
Consumer Applications
Cosmetic Packaging
Food Packaging
Home Appliances
Hoses
Medical Devices
Plastics and Elastomers Functions: Resin

Technical data

Table 1 of 6

15 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	114	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	114	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	2.2	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2.2	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	11800	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	210	MPa	ASTM D790
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	189	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	9100	MPa	ASTM D790
Tensile Stress (Yield, 5 mm/min) ¹¹	139	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	139	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹¹	1.6	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	1.6	%	ISO 527

Table 2 of 6

9 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	1.54	—	ASTM D792
Water Absorption (at 23°C, 24hrs) ¹¹	0.1	%	ASTM D570
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.5 - 0.7	%	SABIC method
Mold Shrinkage (xflow, 3.2 mm) ᵍ ¹¹	0.8 - 1	%	SABIC method
Melt Flow Rate (at 250°C, 5 kgf) ¹¹	52	g/10 min	ASTM D1238
Density ¹¹	1.54	g/cm³	ISO 1183
Water Absorption (at 23°C, saturated) ¹¹	0.09	%	ISO 62-1
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.1	%	ISO 62
Melt Volume Rate (at 250°C, 5 kg) ¹¹	38	cm³/10 min	ISO 1133

Table 3 of 6

8 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.8 MPa, 3.2 mm, Unannealed) ¹¹	203	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	207	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000025	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000025	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000089	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000089	1/°C	ASTM E831
Ball Pressure Test (approximate maximum) ¹¹	200	°C	IEC 60695-10-2
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	217	°C	ISO 75/Bf

Table 4 of 6

2 rows

Characteristic	Value	Unit	Method
Volume Resistivity ¹¹	min. 1E15	Ω.cm	ASTM D257
Dielectric Strength (in air, at 3.2mm) ¹¹	23	kV/mm	ASTM D149

Table 5 of 6

7 rows

Characteristic	Value	Unit	Method
Izod Impact (Unnotched, at 23°C) ¹¹	770	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	82	J/m	ASTM D256
Izod Impact (Notched, at -30°C) ¹¹	83	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	7	J	ASTM D3763
Izod Impact (Notched, 80104, at 23°C) ¹¹	8	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80104, at -30°C) ¹¹	8	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80104 sp=62mm) ¹¹	14	kJ/m²	ISO 179/1eA

Table 6 of 6

14 rows

Characteristic	Value	Unit
Drying Temperature ⁷	120	°C
Drying Time ⁷	3 - 4	Hrs
Drying Time (Cumulative) ⁷	12	Hrs
Maximum Moisture Content ⁷	0.02	%
Melt Temperature ⁷	250 - 265	°C
Nozzle Temperature ⁷	245 - 265	°C
Front - Zone 3 Temperature ⁷	250 - 265	°C
Middle - Zone 2 Temperature ⁷	245 - 260	°C
Rear - Zone 1 Temperature ⁷	240 - 255	°C
Mold Temperature ⁷	65 - 90	°C
Back Pressure ⁷	0.3 - 0.7	MPa
Screw Speed ⁷	50 - 80	rpm