NORYL GTX™ Resin GTX902BIO3

Chemical Family: PolyamidesPolyethers

NORYL GTX™ Resin GTX902BIO3 is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA) with bio-based content, designed specifically for automotive wheel cover applications. This injection moldable grade offers exceptional chemical resistance and superior paintability, making it an ideal choice for automotive components where durability and esthetic appeal are crucial. NORYL GTX™ Resin GTX902BIO3 ensures reliable performance in demanding environments, providing manufacturers with a sustainable and high-performance solution for their automotive needs.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Housewares
Consumer Goods — Sports & Recreation

Automotive & Transportation — Automotive

Exterior & Body

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Industrial — Power, Water & Utilities

Power & Utilities

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Other characteristics

Brand: NORYL GTX™ Resin
Density: 1080.0 - 1080.0 kg/m³
Polymer Name: PPE/PS/PA Alloy
Flexural Modulus: 2240.0 - 2240.0 MPa
Processing Methods: Injection Molding
Note: (1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card. (3) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Industrial
Technology: Plastics
Labeling Claims: No Added PFAS
Sustainable
Material Features: Chemical Resistant
Dimensional Stability
High Hydrolytic Stability
High Stiffness
High Strength
Impact Resistance
Low Moisture Absorption
Low Shrinkage
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Automotive Exterior Parts
Commercial Appliance
Energy Management
Heavy Truck
Home Appliances
Housewares
Mobile Phone Housings
Recreational Vehicle Components
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

17 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, 50 mm/min) ¹	58.0	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹	54.0	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹	9.0	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹	46.0	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹	2154.0	MPa	ISO 527
Flexural Modulus (at 2 mm/min) ¹	2227.0	MPa	ISO 178
Flexural Strength (2 mm/min) ¹	91.0	MPa	ISO 178
Tensile Modulus (at 50 mm/min) ¹	2173.0	MPa	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹	45.0	%	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹	11.0	%	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹	54.0	MPa	ASTM D638
Tensile Stress (Yield, Type I, 50 mm/min) ¹	58.0	MPa	ASTM D638

Table 2 of 6

14 rows

Characteristic	Value	Unit	Method
Density ¹	1.09	g/cm³	ISO 1183
Moisture Absorption (23°C/50% RH/24hrs) ¹	0.2	%	ISO 62-4
Moisture Absorption (23°C/50% RH/Equilibrium) ¹	0.57	%	ISO 62-4
Water Absorption (23°C/saturated) ¹	2.02	%	ISO 62-1
Water Absorption (23°C/24hrs) ¹	0.73	%	ISO 62-1
Water Absorption (23°C/24hrs) ¹	0.73	%	ASTM D570
Mold Shrink (flow, annealed 130C 1hr) ¹	1.1 - 1.5	%	ASTM D955
Mold Shrinkage (flow, 3.2 mm) ¹	0.9 - 1.2	%	SABIC method
Mold Shrinkage (xflow, 3.2 mm) ¹	0.8 - 1.1	%	SABIC method
Melt Volume Rate (at 280°C/2.16 kg) ¹	5.4	cm³/10 min	ISO 1133
Melt Volume Rate (at 280°C/5.0 kg) ¹	12.0	cm³/10 min	ISO 1133
Specific Gravity ¹	1.08	—	ASTM D792

Table 3 of 6

15 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature/Af (1.8 MPa Flatw 80104 sp=64mm) ¹	113.0	°C	ISO 75/Af
Heat Deflection Temperature/Bf (0.45 MPa Flatw 80104 sp=64mm) ¹	154.0	°C	ISO 75/Bf
Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹	120.0	°C	ASTM D648
Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹	155.0	°C	ASTM D648
Vicat Softening Temperature (at Rate B/50) ¹	166.0	°C	ISO 306
Vicat Softening Temperature (at Rate B/50) ¹	200.0	°C	ASTM D1525
Vicat Softening Temperature (at Rate A/50) ¹	232.0	°C	ASTM D1525
Vicat Softening Temperature (at Rate A/50) ¹	235.0	°C	ISO 306
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹	9.3e-05	1/°C	ASTM E831
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹	9.3e-05	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -20°C to 150°C, flow) ¹	9.0e-05	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -20°C to 150°C, xflow) ¹	9.3e-05	1/°C	ASTM E831

Table 4 of 6

12 rows

Characteristic	Value	Unit	Method
Izod Impact (Notched 80104 +23°C) ¹	18.0	kJ/m²	ISO 180/1A
Izod Impact (Unnotched 80104 +23°C) ¹	NB	kJ/m²	ISO 180/1U
Charpy Impact (at 23°C, V-notch Edgew 80103 sp=62mm) ¹	19.0	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80104 sp=62mm) ¹	NB	kJ/m²	ISO 179/1eU
Izod Impact (Notched, 23°C) ¹	220.0	J/m	ASTM D256
Izod Impact (Notched, -30°C) ¹	117.0	J/m	ASTM D256
Izod Impact (Notched, -40°C) ¹	53.0	J/m	ASTM D256
Izod Impact (Unnotched, 23°C) ¹	3204.0	J/m	ASTM D4812
Izod Impact (Unnotched, -30°C) ¹	3204.0	J/m	ASTM D4812
Izod Impact (Unnotched, -40°C) ¹	3204.0	J/m	ASTM D4812
Instrumented Dart Impact Energy (at peak, 23°C) ¹	46.0	J	ASTM D3763
Instrumented Dart Impact Energy (at peak, -30°C) ¹	36.0	J	ASTM D3763

Table 5 of 6