NORYL GTX™ Resin GTX626

Name: NORYL GTX™ Resin GTX626
Brand: NORYL GTX™ Resin

SABIC's Specialties Business NORYL™ GTX626 resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This blow moldable and extrudable grade exhibits high heat resistance and excellent chemical resistance. NORYL™ GTX626 resin may be an excellent candidate for exterior automotive applications such as wheel covers and wheel trim.

Product families

Applications

Automotive & Transportation — Automotive

Electrical & Electronic Systems
Exterior & Body
Interior

Electrical & Electronics — Parts & Components

Batteries
Housings & Enclosures

Automotive & Transportation — Transportation

Off Road & Recreational Vehicle (RV)
Rail & Mass Transit

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Other characteristics

Brand: NORYL GTX™ Resin
Density: 1090.0 - 1090.0 kg/m³
Polymer Name: PPO/Nylon Alloy
Processing Methods: Extrusion, Extrusion Blow Molding (EBM)
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
Markets: Automotive & Transportation
Electrical & Electronics
Flame Rating: UL 94 HB
Technology: Plastics
Additives Included: Heat Stabilizer
Impact Modifier
Material Features: Chemical Resistant
Creep Resistant
Dimensional Stability
Heat Stabilized
High Hydrolytic Stability
High Impact Resistance
High Stiffness
High Temperature Resistance
Country Availability: Canada
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Automotive Applications
Automotive Exterior Parts
Back Panel
Battery Cover
Corner Support Plates
Covers
Crash Protection
Front Panel
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Extrusion
Extrusion Blow Molding (EBM)

Technical data

Table 1 of 6

4 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	62	MPa	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	83	%	ASTM D638
Flexural Stress (Yield, 2.6 mm/min, 100 mm span) ¹¹	95	MPa	ASTM D790
Flexural Modulus (at 2.6 mm/min, 100 mm span) ¹¹	2270	MPa	ASTM D790

Table 2 of 6

2 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	1.09	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	1.3 - 1.4	%	SABIC method

Table 3 of 6

1 row

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹	179	°C	ASTM D648

Table 4 of 6

13 rows

Characteristic	Value	Unit
Adapter - Zone 5 Temperature	275 - 290	°C
Barrel - Zone 1 Temperature	270 - 280	°C
Barrel - Zone 2 Temperature	270 - 280	°C
Barrel - Zone 3 Temperature	270 - 280	°C
Barrel - Zone 4 Temperature	270 - 280	°C
Die Temperature	275 - 290	°C
Drying Temperature	80	°C
Drying Time	4	Hrs
Drying Time (Cumulative)	16	Hrs
Head - Zone 6 - Top Temperature	275 - 290	°C
Head - Zone 7 - Bottom Temperature	275 - 290	°C
Melt Temperature (Parison)	275 - 290	°C

Table 5 of 6