NORYL GTX™ Resin GTX6801
SABIC's Specialties Business NORYL GTX6801 resin is a 30% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 8430MPa), excellent chemical resistance, and high heat resistance. NORYL GTX6801 resin is an excellent candidate for industrial applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
- Electrical & Electronic Systems
- Powertrain & UTH
- Batteries
- Connectors
- Housings & Enclosures
- Switches & Relays
Product Families
- Blends & Alloys
Other characteristics
- Brand
- NORYL GTX™ Resin
- Density
- 1330.0 - 1330.0 kg/m³
- Polymer Name
- PPO/Nylon Alloy
- Flexural Modulus
- 8430.0 - 8430.0 MPa
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Fillers Included
- Glass Fiber
- Material Features
- Chemical Resistant
- Dimensional Stability
- High Hydrolytic Stability
- High Stiffness
- High Strength
- High Temperature Resistance
- High Tensile Strength
- Low Moisture Absorption
- Country Availability
- China (Mainland)
- Plastics and Elastomers End Uses
- Automotive Under The Hood
- Back Panel
- Battery Cover
- Corner Support Plates
- Crash Protection
- Electrical Components
- Electrical/Electronic Applications
- Front Panel
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield) ¹¹ | 157 | MPa | SABIC - Japan Method |
| Tensile Strain (Break) ¹¹ | 10 | % | SABIC - Japan Method |
| Flexural Stress ¹¹ | 216 | MPa | ASTM D790 |
| Flexural Modulus ¹¹ | 8430 | MPa | ASTM D790 |
Table 2 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity ¹¹ | 1.33 | — | ASTM D792 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.5 | % | ASTM D570 |
| Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹ | 0.3 - 0.7 | % | SABIC method |
| Melt Flow Rate (at 280°C, 5.0 kgf) ¹¹ | 24.2 | g/10 min | ASTM D1238 |
Table 3 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹ | 230 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -30°C to 30°C) ¹¹ | 0.00003 - 0.00005 | 1/°C | TMA |
Table 4 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, at 23°C) ¹¹ | 88 | J/m | ASTM D256 |
Table 5 of 5
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 140 | °C |
| Drying Time ⁷ | 2 - 4 | Hrs |
| Melt Temperature ⁷ | 275 - 290 | °C |
| Nozzle Temperature ⁷ | 275 - 290 | °C |
| Front - Zone 3 Temperature ⁷ | 275 - 290 | °C |
| Middle - Zone 2 Temperature ⁷ | 265 - 280 | °C |
| Rear - Zone 1 Temperature ⁷ | 260 - 270 | °C |
| Mold Temperature ⁷ | 80 - 120 | °C |
| Screw Speed ⁷ | 30 - 80 | rpm |
| Back Pressure ⁷ | 0.5 - 1.5 | MPa |
