NORYL™ Resin IGN320

Name: NORYL™ Resin IGN320
Brand: NORYL™ Resin

SABIC's Specialties Business NORYL IGN320 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade exhibits high heat resistance, high modulus, very low moisture absorption, and good dimensional stability. NORYL IGN320 resin is an excellent candidate for automotive applications such as ignition coils where heat and high modulus is required. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Product families

Applications

Automotive & Transportation — Automotive

Exterior & Body
Powertrain & UTH

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Other characteristics

Brand: NORYL™ Resin
Density: 1200.0 - 1200.0 kg/m³
Polymer Name: PPO/PS Alloy
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Automotive & Transportation
Technology: Plastics
Labeling Claims: No Added PFAS
Fillers Included: Glass Fiber
Material Features: Amorphous
Dimensional Stability
Excellent Stiffness
Good Stiffness
High Hydrolytic Stability
High Stiffness
High Strength
High Temperature Resistance
Country Availability: Canada
Mexico
USA
Plastics and Elastomers End Uses: Automotive Exterior Parts
Automotive Under The Hood
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

6 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	108	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	108	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2.4	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	6260	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	170	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	5720	MPa	ASTM D790

Table 2 of 6

4 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	1.2	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.1 - 0.3	%	SABIC method
Mold Shrinkage (xflow, 3.2 mm) ᵍ ¹¹	0.2 - 0.4	%	SABIC method
Melt Flow Rate (at 300°C, 5.0 kgf) ¹¹	12.8	g/10 min	ASTM D1238

Table 3 of 6

3 rows

Characteristic	Value	Unit	Method
Vicat Softening Temperature (Rate B/50) ¹¹	175	°C	ASTM D1525
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	1.64E+02	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	158	°C	ASTM D648

Table 4 of 6

1 row

Characteristic	Value	Unit	Method
Dielectric Strength (in oil, at 1.6mm) ¹¹	33.9	kV/mm	ASTM D149

Table 5 of 6