NORYL™ Resin NH5120BIO4
- Chemical Family
- PolyethersStyrenics
NORYL™ Resin NH5120BIO4 is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) featuring bio-based content. This injection moldable grade includes non-brominated, non-chlorinated flame retardant additives, achieving a UL94 flame rating of V1 at 1.5mm thickness. NORYL™ Resin NH5120BIO4 offers a well-rounded blend of heat resistance, flowability, hydrolytic stability, low creep, and dimensional stability, coupled with robust mechanical properties that endure challenging outdoor conditions. Specifically designed for applications such as outdoor housings and enclosures, HVAC components, and photovoltaic/solar junction boxes, NORYL™ Resin NH5120BIO4 resin provides manufacturers with a reliable material choice that meets stringent performance and safety requirements in diverse environmental settings.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Housewares
- Consumer Goods — Lawn & Garden
- Consumer Goods — Sports & Recreation
- Structural Components
- Consumer Electronics
- Housings & Enclosures
- Photovoltaic Components
- Power & Utilities
Product Families
- Blends & Alloys
Other characteristics
- Brand
- NORYL™ Resin
- Density
- 1100.0 - 1100.0 kg/m³
- Polymer Name
- PPE/PS Alloy
- Flexural Modulus
- 2610.0 - 2610.0 MPa
- Processing Methods
- Injection Molding
- Note
(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) Based on internal method similar to ISO 62 (3) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. (4) UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card. (5) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Flame Rating
- UL 94 V1
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Sustainable
- Additives Included
- Flame Retardant
- Material Features
- Amorphous
- Dimensional Stability
- Flame Retardant
- Good Mechanical Properties
- High Flow
- High Hydrolytic Stability
- Low Creep
- Low Moisture Absorption
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Building Materials
- Commercial Appliance
- Electrical Components
- Energy Management
- HVAC
- Home Appliances
- Housewares
- Mobile Phone Housings
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield, 50 mm/min) ¹ | 65.0 | MPa | ISO 527 |
| Tensile Stress (Break, 50 mm/min) ¹ | 57.0 | MPa | ISO 527 |
| Tensile Strain (Yield, 50 mm/min) ¹ | 4.4 | % | ISO 527 |
| Tensile Strain (Break, 50 mm/min) ¹ | 9.2 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹ | 2650.0 | MPa | ISO 527 |
| Flexural Modulus (at 2 mm/min) ¹ | 2610.0 | MPa | ISO 178 |
| Flexural Stress (Yield, 2 mm/min) ¹ | 105.0 | MPa | ISO 178 |
| Tensile Modulus (at 50 mm/min) ¹ | 2610.0 | MPa | ASTM D638 |
| Tensile Strain (Break, Type I, 50 mm/min) ¹ | 4.5 | % | ASTM D638 |
| Tensile Stress (Break, Type I, 50 mm/min) ¹ | 52.0 | MPa | ASTM D638 |
| Tensile Stress (Yield, Type I, 50 mm/min) ¹ | 66.0 | MPa | ASTM D638 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹ | 2680.0 | MPa | ASTM D790 |
Table 2 of 7
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹ | 1.08 | g/cm³ | ISO 1183 |
| Water Absorption (23°C/saturated) ² | 0.25 | % | ISO 62-1 |
| Moisture Absorption (23°C / 50% RH) ² | 0.05 | % | ISO 62 |
| Mold Shrinkage (xflow) ³ | 0.5 - 0.7 | % | SABIC method |
| Specific Gravity ¹ | 1.1 | — | ASTM D792 |
| Melt Flow Rate (at 280°C/5.0 kgf) ¹ | 12.2 | g/10 min | ASTM D1238 |
Table 3 of 7
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 118.0 | °C | ISO 75/Af |
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 116.0 | °C | ASTM D648 |
| Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹ | 131.0 | °C | ASTM D648 |
| Vicat Softening Temperature (at Rate B/50) ¹ | 136.0 | °C | ISO 306 |
| Vicat Softening Temperature (at Rate B/50) ¹ | 136.0 | °C | ASTM D1525 |
| Vicat Softening Temperature (at Rate B/120) ¹ | 138.0 | °C | ISO 306 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 8.1e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 8.1e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 7.7e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 7.7e-05 | 1/°C | ASTM E831 |
| Relative Temperature Index (Elec) ¹ | 110.0 | °C | UL 746B |
| Relative Temperature Index (Mech with impact) ¹ | 105.0 | °C | UL 746B |
Table 4 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Comparative Tracking Index (UL) ¹ | 2.0 | PLC Code | UL 746A |
| High Voltage Arc Track Rate ¹ | 4.0 | PLC Code | UL 746A |
| Arc Resistance (Tungsten) ¹ | 6.0 | PLC Code | ASTM D495 |
Table 5 of 7
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 15.0 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched 80*10*4 -30°C) ¹ | 12.0 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*3 sp=62mm) ¹ | 17.0 | kJ/m² | ISO 179/1eA |
| Izod Impact (Notched, 23°C) ¹ | 186.0 | J/m | ASTM D256 |
| Izod Impact (Notched, -30°C) ¹ | 111.0 | J/m | ASTM D256 |
| Instrumented Dart Impact Total Energy (at 23°C) ¹ | 53.0 | J | ASTM D3763 |
Table 6 of 7
13 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁵ | 105 - 110 | °C |
| Drying Time ⁵ | 3 - 4 | Hrs |
| Drying Time (Cumulative) ⁵ | 8.0 | Hrs |
| Maximum Moisture Content ⁵ | 0.02 | % |
| Melt Temperature ⁵ | 280 - 310 | °C |
| Rear - Zone 1 Temperature ⁵ | 250 - 300 | °C |
| Middle - Zone 2 Temperature ⁵ | 260 - 305 | °C |
| Front - Zone 3 Temperature ⁵ | 270 - 310 | °C |
| Nozzle Temperature ⁵ | 280 - 310 | °C |
| Mold Temperature ⁵ | 75 - 105 | °C |
| Back Pressure ⁵ | 0.3 - 0.7 | MPa |
| Screw Speed ⁵ | 10 - 100 | rpm |
Table 7 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Glow Wire Ignitability Temperature (at 3.0 mm) ⁴ | 750.0 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature (at 1.5 mm) ⁴ | 725.0 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature (at 2.0 mm) ⁴ | 700.0 | °C | IEC 60695-2-13 |
| Glow Wire Ignitability Temperature (at 1.0 mm) ⁴ | 725.0 | °C | IEC 60695-2-13 |
| Glow Wire Flammability Index (at 3.0 mm) ⁴ | 960.0 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at 2.0 mm) ⁴ | 960.0 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at 1.0 mm) ⁴ | 960.0 | °C | IEC 60695-2-12 |
