LNP™ VERTON™ Compound UV00AS
- Chemical Family
- Polyamides
LNP™ VERTON™ Compound UV00AS is formulated with Polyphthalamide (PPA) resin and 50% long glass fiber, offering exceptional heat stabilization and structural integrity. This compound is designed to excel in high-temperature environments, ensuring reliable performance under thermal stress. Its composition enhances dimensional stability and mechanical strength, making it suitable for demanding applications in automotive, electrical, and industrial sectors where heat resistance and robust structural properties are critical. LNP™ VERTON™ Compound UV00AS provides manufacturers with a versatile solution for components requiring both durability and thermal stability, meeting stringent performance requirements across various industries.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Exterior & Body
- Structural Components
- Industrial Automation
Product Families
- Polyamides
Other characteristics
- Brand
- LNP™ VERTON™ Compound
- Polymer Name
- Polyphthalamide (PPA)
- Fillers Included
- Glass Fiber
- Processing Methods
- Injection Molding
- Note
(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.,The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (3) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- Good UV Stability
- Good Weather Stability
- Heat Stabilized
- High Stiffness
- High Strength
- Plastics and Elastomers End Uses
- Automotive Exterior Parts
- Building Materials
- Commercial Appliance
- Home Appliances
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (at 50 mm/min) ¹ | 19300.0 | MPa | ASTM D638 |
| Flexural Stress ¹ | 386.0 | MPa | ASTM D790 |
| Flexural Stress ¹ | 393.0 | MPa | ISO 178 |
| Tensile Stress (Yield) ¹ | 222.0 | MPa | ISO 527 |
| Tensile Stress (Yield) ¹ | 257.0 | MPa | ASTM D638 |
| Tensile Stress (Break) ¹ | 222.0 | MPa | ISO 527 |
| Tensile Stress (Break) ¹ | 257.0 | MPa | ASTM D638 |
| Tensile Strain (Yield) ¹ | 1.4 | % | ISO 527 |
| Tensile Strain (Yield) ¹ | 1.8 | % | ASTM D638 |
| Tensile Strain (Break) ¹ | 1.8 | % | ASTM D638 |
| Tensile Strain (Break) ¹ | 1.4 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹ | 19220.0 | MPa | ISO 527 |
Table 2 of 5
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Moisture Absorption (23°C/50% RH/24 hrs) ¹ | 0.2 | % | ASTM D570 |
| Mold Shrinkage (flow, 24 hrs) ² | 0.2 | % | ASTM D955 |
| Mold Shrinkage (flow, 24 hrs) ² | 0.2 | % | ISO 294 |
| Mold Shrinkage (xflow, 24 hrs) ² | 0.48 | % | ISO 294 |
| Mold Shrinkage (xflow, 24 hrs) ² | 0.5 | % | ASTM D955 |
| Density ¹ | 1.66 | g/cm³ | ISO 1183 |
| Density ¹ | 1.67 | g/cm³ | ASTM D792 |
Table 3 of 5
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹ | 291.0 | °C | ASTM D648 |
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 266.0 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.44e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.5e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 3.06e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 3.1e-05 | 1/°C | ISO 11359-2 |
| Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ | 296.0 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 272.0 | °C | ISO 75/Af |
Table 4 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, 23°C) ¹ | 1228.0 | J/m | ASTM D4812 |
| Izod Impact (Notched, 23°C) ¹ | 267.0 | J/m | ASTM D256 |
| Instrumented Dart Impact Energy (at peak, 23°C) ¹ | 9.0 | J | ASTM D3763 |
| Multiaxial Impact ¹ | 7.0 | J | ISO 6603 |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 78.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 41.0 | kJ/m² | ISO 180/1A |
Table 5 of 5
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ³ | 120 - 150 | °C |
| Drying Time ³ | 4.0 | Hrs |
| Maximum Moisture Content ³ | 0.15 | % |
| Melt Temperature ³ | 315 - 330 | °C |
| Front - Zone 3 Temperature ³ | 330 - 345 | °C |
| Middle - Zone 2 Temperature ³ | 320 - 330 | °C |
| Rear - Zone 1 Temperature ³ | 315 - 325 | °C |
| Mold Temperature ³ | 140 - 165 | °C |
| Back Pressure ³ | 0.2 - 0.3 | MPa |
| Screw Speed ³ | 30 - 60 | rpm |
