LNP™ VERTON™ Compound RX06422
- Chemical Family
- Polyamides
LNP™ VERTON™ Compound RX06422 combines Polyamide 66 (nylon 66) resin with 50% long glass fiber, offering enhanced properties suitable for a variety of applications. This compound is specifically engineered for easy molding, providing manufacturers with flexibility and efficiency in production processes. It features heat stabilization and UV stabilization, ensuring durability and performance in outdoor and high-temperature environments. Its structural integrity makes it ideal for applications where strength and reliability are crucial, such as automotive components, industrial equipment, and outdoor products. This product delivers a balance of mechanical strength, dimensional stability, and weather resistance, making it a versatile choice for demanding engineering applications.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Exterior & Body
- Structural Components
- Industrial Automation
Product Families
- Polyamides
Other characteristics
- Brand
- LNP™ VERTON™ Compound
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Glass Fiber
- Processing Methods
- Injection Molding
- Note
(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card. (3) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. (4) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Quality Standards
- UL 746C
- Material Features
- Easy To Mold
- Good Processability
- Good UV Stability
- Good Weather Stability
- Heat Stabilized
- High Stiffness
- High Strength
- UV Stabilized
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Automotive Exterior Parts
- Building Materials
- Commercial Appliance
- Home Appliances
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break) ¹ | 254.0 | MPa | ASTM D638 |
| Tensile Stress (Break) ¹ | 256.0 | MPa | ISO 527 |
| Tensile Strain (Break) ¹ | 1.9 | % | ASTM D638 |
| Tensile Strain (Break) ¹ | 1.9 | % | ISO 527 |
| Tensile Modulus (at 5 mm/min) ¹ | 16890.0 | MPa | ASTM D638 |
| Flexural Modulus ¹ | 14160.0 | MPa | ASTM D790 |
| Flexural Modulus ¹ | 15550.0 | MPa | ISO 178 |
| Tensile Modulus (at 1 mm/min) ¹ | 18380.0 | MPa | ISO 527 |
| Flexural Stress ¹ | 374.0 | MPa | ASTM D790 |
| Flexural Stress ¹ | 370.0 | MPa | ISO 178 |
Table 2 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹ | 1.58 | g/cm³ | ASTM D792 |
| Density ¹ | 1.58 | g/cm³ | ISO 1183 |
| Mold Shrinkage (flow, 24 hrs) ³ | 0.3 | % | ISO 294 |
| Mold Shrinkage (xflow, 24 hrs) ³ | 0.8 | % | ISO 294 |
Table 3 of 7
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 241.0 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.85e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.86e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 6.73e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 6.73e-05 | 1/°C | ISO 11359-2 |
| Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ | 258.0 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 253.0 | °C | ISO 75/Af |
| Relative Temperature Index (Elec) ² | 105.0 | °C | UL 746B |
| Relative Temperature Index (Mech with impact) ² | 110.0 | °C | UL 746B |
| Relative Temperature Index (Mech w/o impact) ² | 110.0 | °C | UL 746B |
Table 4 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Hot-Wire Ignition (HWI, PLC 0) ² | min. 1.5 | mm | UL 746A |
| High Amp Arc Ignition (HAI, PLC 0) ² | min. 1.5 | mm | UL 746A |
Table 5 of 7
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, 23°C) ¹ | 384.0 | J/m | ASTM D256 |
| Instrumented Dart Impact Energy (at peak, 23°C) ¹ | 15.0 | J | ASTM D3763 |
| Multiaxial Impact ¹ | 15.0 | J | ISO 6603 |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 89.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 45.0 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched 80*10*4 -40°C) ¹ | 38.0 | kJ/m² | ISO 180/1A |
Table 6 of 7
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁴ | 80.0 | °C |
| Drying Time ⁴ | 4.0 | Hrs |
| Maximum Moisture Content ⁴ | 0.15 - 0.25 | % |
| Melt Temperature ⁴ | 290 - 305 | °C |
| Front - Zone 3 Temperature ⁴ | 290 - 300 | °C |
| Middle - Zone 2 Temperature ⁴ | 290 - 300 | °C |
| Rear - Zone 1 Temperature ⁴ | 280 - 295 | °C |
| Mold Temperature ⁴ | 95 - 110 | °C |
| Back Pressure ⁴ | 0.2 - 0.3 | MPa |
| Screw Speed ⁴ | 30 - 60 | rpm |
Table 7 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized 94HB Flame Class Rating ² | min. 1.5 | mm | UL 94 |
| UV-light Water exposure/immersion ² | F1 | — | UL 746C |
