LNP™ VERTON™ Compound RV00CESS
- Chemical Family
- Polyamides
LNP™ VERTON™ Compound RV00CESS combines Polyamide 66 (nylon 66) resin with 60% long glass fiber to deliver enhanced structural integrity. This compound is designed for easy molding, facilitating efficient manufacturing processes. It also features heat stabilization, ensuring dimensional stability and performance under elevated temperatures. LNP™ VERTON™ Compound RV00CESS is ideal for a wide range of industrial applications where robust mechanical properties and reliability are crucial. It provides high stiffness and impact resistance, making it suitable for demanding environments such as automotive components, electrical enclosures, and structural parts. Manufacturers can rely on this compound to meet stringent performance requirements while achieving excellent surface finish and esthetic appeal in their end products.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Exterior & Body
- Structural Components
- Industrial Automation
Product Families
- Polyamides
Other characteristics
- Brand
- LNP™ VERTON™ Compound
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Glass Fiber
- Processing Methods
- Injection Molding
- Note
(1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card. (3) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.,The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (4) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- Easy To Mold
- Good Processability
- Heat Stabilized
- High Stiffness
- High Strength
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Automotive Exterior Parts
- Building Materials
- Commercial Appliance
- Home Appliances
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Break) ¹ | 270.0 | MPa | ASTM D638 |
| Tensile Strain (Break) ¹ | 1.6 | % | ASTM D638 |
| Tensile Modulus (at 50 mm/min) ¹ | 19650.0 | MPa | ASTM D638 |
| Flexural Stress ¹ | 430.0 | MPa | ASTM D790 |
| Flexural modulus ¹ | 18020.0 | MPa | ASTM D790 |
| Tensile Stress (Yield, 5 mm/min) ¹ | 281.0 | MPa | ISO 527 |
| Tensile Stress (Break, 5 mm/min) ¹ | 279.0 | MPa | ISO 527 |
| Tensile Strain (Yield, 5 mm/min) ¹ | 1.7 | % | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹ | 1.7 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹ | 22450.0 | MPa | ISO 527 |
| Flexural Stress (Yield, 2 mm/min) ¹ | 418.0 | MPa | ISO 178 |
| Flexural Strain (Break, 2 mm/min) ¹ | 3.0 | % | ISO 178 |
Table 2 of 6
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹ | 1.71 | g/cm³ | ISO 1183 |
| Density ¹ | 1.71 | g/cm³ | ASTM D792 |
| Moisture Absorption (23°C/50% RH/24 hrs) ¹ | 0.44 | % | ASTM D570 |
| Mold Shrinkage (flow, 24 hrs) ³ | 0.2 | % | ASTM D955 |
| Mold Shrinkage (flow, 24 hrs) ³ | 0.2 | % | ISO 294 |
| Mold Shrinkage (xflow, 24 hrs) ³ | 0.4 | % | ASTM D955 |
| Mold Shrinkage (xflow, 24 hrs) ³ | 0.4 | % | ISO 294 |
| Water Absorption (23°C/24hrs) ¹ | 0.9 | % | ISO 62-1 |
Table 3 of 6
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 247.0 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.7e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 1.76e-05 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 5.3e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 5.36e-05 | 1/°C | ASTM E831 |
| Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ | 254.0 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 252.0 | °C | ISO 75/Af |
| Relative Temperature Index (Elec) ² | 65.0 | °C | UL 746B |
| Relative Temperature Index (Mech with impact) ² | 65.0 | °C | UL 746B |
| Relative Temperature Index (Mech w/o impact) ² | 65.0 | °C | UL 746B |
Table 4 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, 23°C) ¹ | 411.0 | J/m | ASTM D256 |
| Instrumented Dart Impact Energy (at peak, 23°C) ¹ | 18.0 | J | ASTM D3763 |
| Multiaxial Impact ¹ | 18.0 | J | ISO 6603 |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 100.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 53.0 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched 80*10*4 -40°C) ¹ | 43.0 | kJ/m² | ISO 180/1A |
Table 5 of 6
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁴ | 80.0 | °C |
| Drying Time ⁴ | 4.0 | Hrs |
| Maximum Moisture Content ⁴ | 0.15 - 0.25 | % |
| Melt Temperature ⁴ | 290 - 305 | °C |
| Front - Zone 3 Temperature ⁴ | 290 - 300 | °C |
| Middle - Zone 2 Temperature ⁴ | 290 - 300 | °C |
| Rear - Zone 1 Temperature ⁴ | 280 - 295 | °C |
| Mold Temperature ⁴ | 95 - 110 | °C |
| Back Pressure ⁴ | 0.2 - 0.3 | MPa |
| Screw Speed ⁴ | 30 - 60 | rpm |
Table 6 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized 94HB Flame Class Rating ² | min. 0.8 | mm | UL 94 |
