LNP™ VERTON™ Compound RV008ES
- Chemical Family
- Polyamides
LNP™ VERTON™ Compound RV008ES is a compound based on polyamide 66 (nylon 66) resin containing 40% long glass fiber. Added features include easy molding, heat stabilization, and structural integrity. This compound offers high stiffness and strength, making it suitable for various injection molding applications. Ideal for use in automotive exteriors, building components, sports and leisure equipment, home appliances, and commercial appliances, LNP VERTON RV008ES ensures durability and reliability across different industrial applications. Its enhanced structural properties and heat stabilization contribute to its performance in demanding environments.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
- Exterior & Body
- Structural Components
- Industrial Automation
Product Families
- Polyamides
Other characteristics
- Brand
- LNP™ VERTON™ Compound
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Glass Fiber
- Processing Methods
- Injection Molding
- Note
1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. (3) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- Easy To Mold
- Good Processability
- Heat Stabilized
- High Stiffness
- High Strength
- Plastics and Elastomers End Uses
- Automotive Exterior Parts
- Building Materials
- Commercial Appliance
- Home Appliances
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield) ¹ | 86.5 | MPa | ASTM D638 |
| Tensile Stress (Break) ¹ | 130.0 | MPa | ASTM D638 |
| Tensile Strain (Yield) ¹ | 0.7 | % | ASTM D638 |
| Tensile Strain (Break) ¹ | 1.2 | % | ASTM D638 |
| Flexural Stress ¹ | 310.0 | MPa | ASTM D790 |
| Flexural Stress ¹ | 322.0 | MPa | ISO 178 |
| Flexural Modulus ¹ | 10500.0 | MPa | ASTM D790 |
| Tensile Stress (Break, 5 mm/min) ¹ | 223.0 | MPa | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹ | 2.1 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹ | 14100.0 | MPa | ISO 527 |
| Flexural Modulus (at 2 mm/min) ¹ | 10700.0 | MPa | ISO 178 |
Table 2 of 5
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mold Shrinkage (flow) ² | 0.1 - 0.3 | % | SABIC method |
| Mold Shrinkage (xflow) ² | 0.4 - 0.6 | % | SABIC method |
| Water Absorption (23°C/24hrs) ¹ | 1.2 | % | ISO 62-1 |
| Moisture Absorption (23°C/50% RH/24 hrs) ¹ | 0.1 | % | ASTM D570 |
| Density ¹ | 1.46 | g/cm³ | ISO 1183 |
Table 3 of 5
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹ | 2.0e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹ | 0.00013 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹ | 2.1e-05 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹ | 7.1e-05 | 1/°C | ISO 11359-2 |
| Heat Deflection Temperature (0.45 MPa, 3.2 mm, unannealed) ¹ | 257.0 | °C | ASTM D648 |
| Vicat Softening Temperature (at Rate B/120) ¹ | 250.0 | °C | ISO 306 |
| Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹ | 252.0 | °C | ASTM D648 |
| Heat Deflection Temperature/Bf (0.45 MPa Flatw 80*10*4 sp=64mm) ¹ | 258.0 | °C | ISO 75/Bf |
| Heat Deflection Temperature/Af (1.8 MPa Flatw 80*10*4 sp=64mm) ¹ | 251.0 | °C | ISO 75/Af |
Table 4 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Unnotched, 23°C) ¹ | 1072.0 | J/m | ASTM D4812 |
| Izod Impact (Notched, 23°C) ¹ | 273.0 | J/m | ASTM D256 |
| Izod Impact (Unnotched 80*10*4 +23°C) ¹ | 72.0 | kJ/m² | ISO 180/1U |
| Izod Impact (Notched 80*10*4 +23°C) ¹ | 26.0 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹ | 26.0 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹ | 93.0 | kJ/m² | ISO 179/1eU |
Table 5 of 5
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ³ | 80.0 | °C |
| Drying Time ³ | 4.0 | Hrs |
| Maximum Moisture Content ³ | 0.15 - 0.25 | % |
| Melt Temperature ³ | 290 - 305 | °C |
| Front - Zone 3 Temperature ³ | 290 - 300 | °C |
| Middle - Zone 2 Temperature ³ | 290 - 300 | °C |
| Rear - Zone 1 Temperature ³ | 280 - 295 | °C |
| Mold Temperature ³ | 95 - 110 | °C |
| Back Pressure ³ | 0.2 - 0.3 | MPa |
| Screw Speed ³ | 30 - 60 | rpm |
