LNP™ VERTON™ Compound RV008S

Chemical Family: Polyamides

LNP™ VERTON™ Compound RV008S is a compound based on polyamide 66 (nylon 66) resin containing 40% long glass fiber. Added features include heat stabilization and structural integrity. This compound provides high stiffness and strength, making it suitable for various injection molding applications. Ideal for automotive exteriors, building components, sports and leisure equipment, home appliances, and commercial appliances, LNP VERTON RV008S ensures durability and performance across diverse industrial applications. Its enhanced structural properties and heat stabilization contribute to its reliability in demanding environments.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Sports & Recreation

Automotive & Transportation — Automotive

Exterior & Body

Building & Construction — Building Materials

Structural Components

Electrical & Electronics — Devices & Assemblies

Industrial Automation

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: LNP™ VERTON™ Compound
Polymer Name: Polyamide 66 (PA 66)
Fillers Included: Glass Fiber
Processing Methods: Injection Molding
Note: (1) The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. (2) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. (3) Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
Markets: Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Technology: Plastics
Labeling Claims: No Added PFAS
Material Features: Heat Stabilized
High Stiffness
High Strength
Plastics and Elastomers End Uses: Automotive Exterior Parts
Building Materials
Commercial Appliance
Home Appliances
Sporting Goods
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 5

5 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break) ¹	240.0	MPa	ASTM D638
Tensile Strain (Break) ¹	2.1	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹	13850.0	MPa	ASTM D638
Flexural Stress ¹	103.0	MPa	ASTM D790
Flexural Modulus ¹	12410.0	MPa	ASTM D790

Table 2 of 5

2 rows

Characteristic	Value	Unit	Method
Density ¹	1.47	g/cm³	ASTM D792
Mold Shrinkage (flow, 24 hrs) ²	0.2	%	ASTM D955

Table 3 of 5

1 row

Characteristic	Value	Unit	Method
Heat Deflection Temperature (1.82 MPa, 3.2mm, unannealed) ¹	261.0	°C	ASTM D648

Table 4 of 5