LNP™ VERTON™ Compound MV007SU

Chemical Family: PolyolefinsPolypropylenes (PP)

LNP™ VERTON™ Compound MV007SU utilizes polypropylene (PP) resin with a high content of 35% long glass fiber, enhancing its structural integrity and strength. This compound is chemically coupled for improved performance and is further fortified with UV and heat stabilizers, ensuring durability and weather resistance. Designed for rigorous applications across automotive exteriors, building components, water management, sports and leisure equipment, as well as home and commercial appliances, this product offers excellent mechanical properties and stability. It is particularly suitable for injection molding processes, providing reliable performance in diverse industrial and consumer environments.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Sports & Recreation

Automotive & Transportation — Automotive

Exterior & Body

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Other characteristics

Brand: LNP™ VERTON™ Compound
Polymer Name: Polypropylene (unspecified)
Fillers Included: Glass Fiber, Long Glass Fiber
Glass Fiber
Long Glass Fiber
Processing Methods: Injection Molding
Note: ¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. ² UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card. ³ Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. ⁴ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Industrial
Technology: Plastics
Labeling Claims: No Added PFAS
Material Features: Chemically Coupled
Good UV Stability
Good Weather Stability
Heat Stabilized
High Stiffness
High Strength
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Automotive Applications
Commercial Appliance
Construction Applications
Home Appliances
Water Management
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

5 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, 5 mm/min) ¹	115.0	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹	1.7	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹	9800.0	MPa	ISO 527
Flexural Stress (Break, 2 mm/min) ¹	162.0	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹	7700.0	MPa	ISO 178

Table 2 of 6

2 rows

Characteristic	Value	Unit	Method
Density ¹	1.17	g/cm³	ISO 1183
Mold Shrinkage (flow) ³	0.2 - 0.5	%	SABIC method

Table 3 of 6

5 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature/Bf (0.45 MPa Flatw 80104 sp=64mm) ¹	162.0	°C	ISO 75/Bf
Heat Deflection Temperature/Af (1.8 MPa Flatw 80104 sp=64mm) ¹	160.0	°C	ISO 75/Af
Relative Temperature Index (Elec) ²	65.0	°C	UL 746B
Relative Temperature Index (Mech with impact) ²	65.0	°C	UL 746B
Relative Temperature Index (Mech w/o impact) ²	65.0	°C	UL 746B

Table 4 of 6