LNP™ LUBRICOMP™ Compound RKN14

Chemical Family: Polyamides

SABIC's Specialties Business LNP LUBRICOMP RKN14 compound is based on Nylon 6/6 resin containing 20% mineral and Molybdenum diSulfide (MoS2). Added features of this grade include: Dimensional Control, Wear Resistant

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Lawn & Garden
Consumer Goods — Sports & Recreation

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors
Switches & Relays

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: LNP™ LUBRICOMP™ Compound
Polymer Name: Polyamide 66 (PA 66)
Fillers Included: Mineral, Molybdenum Disulfide, Talc
Mineral
Molybdenum Disulfide
Talc
Flexural Modulus: 5000.0 - 5000.0 MPa
Additives Included: Heat Stabilizer, Mold Release Agent
Heat Stabilizer
Mold Release Agent
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Building & Construction
Consumer Goods
Electrical & Electronics
Personal Care
Printing & Packaging
Technology: Plastics
Material Features: Dimensional Stability
Friction Resistant
Good Mold Release
Heat Stabilized
Wear Resistant
Plastics and Elastomers End Uses: Appliances
Building Materials
Cell Phones
Commercial Appliance
Computer Components
Consumer Applications
Containers
Displays
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 5

5 rows

Characteristic	Value	Unit	Method
Tensile Stress (Break, 5 mm/min) ¹¹	77	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	4.2	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	6300	MPa	ISO 527
Flexural Stress (Break, 2 mm/min) ¹¹	111	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	5000	MPa	ISO 178

Table 2 of 5

2 rows

Characteristic	Value	Unit	Method
Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹	0.7 - 0.9	%	SABIC method
Density ¹¹	1.34	g/cm³	ISO 1183

Table 3 of 5

1 row

Characteristic	Value	Unit	Method
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	104	°C	ISO 75/Af

Table 4 of 5