LNP™ STAT-LOY™ Compound D3000IEU6
- Chemical Family
- Polycarbonate (PC)
SABIC's Specialties Business LNP STAT-LOY D3000IEU6 compound is based on Polycarbonate (PC) Copolymer that has been designed towards ATEX compliant applications requiring antistatic. The material has an optimized balance between surface resistivity and impact strength retention after hydro aging, and has excellent low temperature impact. The material is available in a wide range of dark and light colors, including UV stabilization. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
- High Performance Thermoplastics
- Polycarbonates
Other characteristics
- Brand
- LNP™ STAT-LOY™ Compound
- Polymer Name
- Polycarbonate (PC)
- Flexural Modulus
- 1825.0 - 1825.0 MPa
- Additives Included
Anti-Static Agent, Heat Stabilizer, Impact Modifier, Mold Release Agent, UV Stabilizer; Anti-Static Agent; Heat Stabilizer; Impact Modifier; Mold Release Agent; UV Stabilizer
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵐ RTI for this grade is not measured and is based on grades with similar formulation ad performance.; ᵒ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design. Impact measured on natural color; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Color
- Custom
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- No Added PFAS
- Material Features
- Amorphous
- Anti-Static
- Ductile
- Excellent Dielectric Properties
- General Purpose
- Good Aesthetics
- Good Color Stability
- Good Colorability
- Country Availability
- Canada
- China (Mainland)
- Mexico
- USA
- Certifications and Compliance
- ATEX Directives
- Plastics and Elastomers End Uses
- AC Charging Cabinet
- Appliances
- Automotive Under The Hood
- Batteries
- Cell Phones
- Commercial Appliance
- Computer Components
- Displays
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 6
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.16 | g/cm³ | ISO 1183 |
| Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹ | 0.15 | % | ISO 62-4 |
| Moisture Absorption (at 23°C, 50% RH, Equilibrium) ¹¹ | 0.3 | % | ISO 62-4 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.7 | % | ISO 62-1 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.7 | % | ASTM D570 |
| Water Absorption (at 23°C, saturated) ¹¹ | 3.5 | % | ISO 62-1 |
| Water Absorption (at 23°C, saturated) ¹¹ | 3.5 | % | ASTM D570 |
| Melt Volume Rate (at 250°C, 2.16 kg) ¹¹ | 5 | cm³/10 min | ISO 1133 |
| Melt Volume Rate (at 250°C, 5 kg) ¹¹ | 15 | cm³/10 min | ISO 1133 |
| Melt Volume Rate (at 260°C, 5.0 kg) ¹¹ | 23 | cm³/10 min | ISO 1133 |
| Specific Gravity ¹¹ | 1.16 | — | ASTM D792 |
| Melt Flow Rate (at 250°C, 5 kgf) ¹¹ | 15 | g/10 min | ASTM D1238 |
Table 2 of 6
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (at 1 mm/min) ¹¹ | 1750 | MPa | ISO 527 |
| Tensile Stress (Yield, 50 mm/min) ¹¹ | 45 | MPa | ISO 527 |
| Tensile Strain (Yield, 50 mm/min) ¹¹ | 5.5 | % | ISO 527 |
| Tensile Strain (Break, 50 mm/min) ¹¹ | min. 60 | % | ISO 527 |
| Tensile Nominal Strain (Break, 50 mm/min) ¹¹ | min. 60 | % | ISO 527 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 1825 | MPa | ISO 178 |
| Flexural Strength (at 2 mm/min) ¹¹ | 70 | MPa | ISO 178 |
| Tensile Modulus (at 50 mm/min) ¹¹ | 1750 | MPa | ASTM D638 |
| Tensile Stress (Yield, Type I, 50 mm/min) ¹¹ | 45 | MPa | ASTM D638 |
| Tensile Strain (Yield, Type I, 50 mm/min) ¹¹ | 5.5 | % | ASTM D638 |
| Tensile Strain (Break, Type I, 50 mm/min) ¹¹ | min. 60 | % | ASTM D638 |
| Tensile Nominal Strain (Break, Type I, 50 mm/min) ¹¹ | min. 60 | % | ASTM D638 |
Table 3 of 6
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 105 | °C | ISO 75/Af |
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 123 | °C | ISO 75/Bf |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 123 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 123 | °C | ASTM D1525 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 123 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 123 | °C | ASTM D1525 |
| Vicat Softening Temperature (Rate A/50) ¹¹ | 137 | °C | ISO 306 |
| Vicat Softening Temperature (Rate A/120) ¹¹ | 138 | °C | ISO 306 |
| Coefficient of Thermal Expansion (at 23°C to 50°C, flow) ¹¹ | 0.000085 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 50°C, flow) ¹¹ | 0.000085 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at 23°C to 50°C, xflow) ¹¹ | 0.00011 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 50°C, xflow) ¹¹ | 0.00011 | 1/°C | ASTM E831 |
Table 4 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Comparative Tracking Index ¹¹ | 175 | V | IEC 60112 |
| Surface Resistivity (ROA) ᵐ ¹¹ | 1000000000 - 100000000000 | Ω | IEC 60093 |
| Static Decay (at 5000V to max. 50V) ¹¹ | max. 0.01 | Seconds | FTMS101B |
| Dielectric Constant (at at 60-90 GHz) ¹¹ | 2.73 | — | — |
| Dissipation Factor (at at 60-90 GHz) ¹¹ | 0.022 | — | — |
| Surface Resistivity ᵐ ¹¹ | 1000000000 - 100000000000 | Ω | ASTM D257 |
Table 5 of 6
26 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 60 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*3, at 23°C) ¹¹ | 65 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at -30°C) ¹¹ | 60 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*3, at -30°C) ¹¹ | 65 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched, 80*10*3, at 23°C) ¹¹ | No break | kJ/m² | ISO 180/1U |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | No break | kJ/m² | ISO 180/1U |
| Izod Impact (Unnotched, 80*10*3, at -30°C) ¹¹ | No break | kJ/m² | ISO 180/1U |
| Izod Impact (Unnotched, 80*10*4, at -30°C) ¹¹ | No break | kJ/m² | ISO 180/1U |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 60 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 60 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | No break | kJ/m² | ISO 179/1eU |
| Charpy Impact (at -30°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | No break | kJ/m² | ISO 179/1eU |
Table 6 of 6
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure ⁷ | 0.3 - 0.7 | MPa |
| Drying Temperature ⁷ | 80 - 95 | °C |
| Drying Time (Cumulative) ⁷ | 8 | Hrs |
| Drying Time ⁷ | 2 - 4 | Hrs |
| Front - Zone 3 Temperature ⁷ | 240 - 260 | °C |
| Maximum Moisture Content ⁷ | 0.03 | % |
| Melt Temperature ⁷ | 240 - 260 | °C |
| Middle - Zone 2 Temperature ⁷ | 230 - 250 | °C |
| Mold Temperature ⁷ | 50 - 90 | °C |
| Nozzle Temperature ⁷ | 240 - 260 | °C |
| Rear - Zone 1 Temperature ⁷ | 220 - 240 | °C |
| Screw Speed (Circumferential speed) ⁷ | 0.15 - 0.2 | m/s |
