XENOY™ FR Resin ENH2900
SABIC's Specialties Business XENOY™ FR Resin ENH2900 is an injection molding grade based on a polycarbonate/polybutylene terephthalate (PC/PBT) blend. This grade features non-chlorinated, non-brominated flame retardants, good flow, impact modification, and improved chemical resistance, including enhanced resistance to chemicals. This grade is suitable for various applications, including building and construction for outdoor, lawn, and landscape use, as well as for electrical devices and displays, electrical components, and infrastructure.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Lawn & Garden
- Artificial Turf
- Consumer Electronics
- Displays
- Medical Devices & Assemblies
- Tubing & Fluids Handling
- Non-Food Consumer Packaging
- Applicators & Accessories
- Connectors
- Housings & Enclosures
- Switches & Relays
- Jacketing & Insulation
Product Families
- Blends & Alloys
Other characteristics
- Brand
- XENOY™ FR Resin
- Density
- 1200.0 - 1200.0 kg/m³
- Polymer Name
- PC/PBT Alloy
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- Markets
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Personal Care
- Printing & Packaging
- Flame Rating
- UL 94 5VB
- UL 94 HB
- UL 94 V0
- UL 94 V1
- Technology
- Plastics
- Labeling Claims
- Bromine-free
- Chlorine-free
- Additives Included
- Flame Retardant
- Impact Modifier
- Material Features
- Chemical Resistant
- Flame Retardant
- High Flow
- High Flowability
- High Impact Resistance
- Impact Modified
- Non-brominated
- Non-chlorinated
- Country Availability
- Canada
- China (Mainland)
- Mexico
- USA
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Audio Equipment
- Building Materials
- Cables
- Cell Phones
- Computer Components
- Consumer Applications
- Containers
- Covers
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity ¹¹ | 1.2 | — | ASTM D792 |
| Melt Flow Rate (at 266°C, 5.0 kgf) ¹¹ | 26 | g/10 min | ASTM D1238 |
| Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹ | 0.5 - 0.8 | % | SABIC method |
Table 2 of 7
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield, Type I, 50 mm/min) ¹¹ | 63 | MPa | ASTM D638 |
| Tensile Stress (Break, Type I, 50 mm/min) ¹¹ | 42 | MPa | ASTM D638 |
| Tensile Strain (Yield, Type I, 50 mm/min) ¹¹ | 4 | % | ASTM D638 |
| Tensile Strain (Break, Type I, 50 mm/min) ¹¹ | 65 | % | ASTM D638 |
| Tensile Modulus (at 50 mm/min) ¹¹ | 2480 | MPa | ASTM D638 |
| Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹ | 89 | MPa | ASTM D790 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 2240 | MPa | ASTM D790 |
| Tensile Stress (Yield, 50 mm/min) ¹¹ | 67 | MPa | ISO 527 |
| Tensile Stress (Break, 50 mm/min) ¹¹ | 44 | MPa | ISO 527 |
| Tensile Strain (Yield, 50 mm/min) ¹¹ | 4.2 | % | ISO 527 |
| Tensile Strain (Break, 50 mm/min) ¹¹ | 56 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 2500 | MPa | ISO 527 |
Table 3 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 78 | °C | ASTM D648 |
| Heat Deflection Temperature (at 1.8 MPa, 80*10*4mm, Cut) ¹¹ | 82 | °C | ISO 75-1&2 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 102 | °C | ASTM D1525 |
Table 4 of 7
8 rows| Characteristic | Value | Method |
|---|---|---|
| Dielectric Constant (at 1.1 GHz) ¹¹ | 2.85 | SABIC method |
| Dielectric Constant (at 1.9 GHz) ¹¹ | 2.86 | SABIC method |
| Dielectric Constant (at 5 GHz) ¹¹ | 2.81 | SABIC method |
| Dielectric Constant (at 10 GHz) ¹¹ | 2.817 | SABIC method |
| Dissipation Factor (at 1.1 GHz) ¹¹ | 0.00696 | SABIC method |
| Dissipation Factor (at 1.9 GHz) ¹¹ | 0.00676 | SABIC method |
| Dissipation Factor (at 5 GHz) ¹¹ | 0.00817 | SABIC method |
| Dissipation Factor (at 10 GHz) ¹¹ | 0.00778 | SABIC method |
Table 5 of 7
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, at 23°C) ¹¹ | 550 | J/m | ASTM D256 |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 6.7 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 137 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact Total Energy (at 23°C) ¹¹ | 65 | J | ASTM D3763 |
| Multi-Axial Instrumented Impact Energy (peak, at 23°C) ¹¹ | 91 | J | ISO 6603-2 |
| Multi-Axial Instrumented Impact Total Energy (at 23°C) ¹¹ | 124 | J | ISO 6603-2 |
Table 6 of 7
14 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 80 - 90 | °C |
| Drying Time ⁷ | 3 - 4 | Hrs |
| Drying Time (Cumulative) ⁷ | 8 | Hrs |
| Maximum Moisture Content ⁷ | 0.04 | % |
| Melt Temperature ⁷ | 245 - 275 | °C |
| Nozzle Temperature ⁷ | 245 - 275 | °C |
| Front - Zone 3 Temperature ⁷ | 245 - 275 | °C |
| Middle - Zone 2 Temperature ⁷ | 220 - 265 | °C |
| Rear - Zone 1 Temperature ⁷ | 220 - 255 | °C |
| Mold Temperature ⁷ | 60 - 80 | °C |
| Back Pressure ⁷ | 0.3 - 0.7 | MPa |
| Screw Speed ⁷ | 40 - 70 | rpm |
Table 7 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized (94-5VB Flame Class Rating) ᵖ | min. 2.5 | mm | UL 94 |
| UL Recognized (94V-0 Flame Class Rating) ᵖ | min. 1.5 | mm | UL 94 |
| UL Recognized (94V-1 Flame Class Rating) ᵖ | min. 1.1 | mm | UL 94 |
| UL Recognized (94HB Flame Class Rating) ᵖ | 0.4 | mm | UL 94 |
