LNP™ ELCRIN™ 610001UXiQ

SABIC's Specialties Business LNP ELCRIN 610001UXiQ compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend, utilizing ELCRIN iQ upcycling technology containing minimum 12% Post-Consumer Recycling (PCR) weight content. Added features of this grade include: Non-Chlorinated, Non-Brominated Flame Retardant, Good Flow, High Impact, Improved Chemical Resistance, UV Resistant.

Other characteristics

Brand: LNP™ ELCRIN
Density: 1200.0 - 1200.0 kg/m³
Polymer Name: PC/PBT Alloy
Labeling Claims: Bromine-free, Chlorine-free, Contains PCR Resin, Recyclable, Recycled, Sustainable; Bromine-free; Chlorine-free; Contains PCR Resin; Recyclable; Recycled; Sustainable
Melt Flow Index: 26.0 - 26.0 g/10 min
Processing Methods: Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Healthcare & Pharma
Personal Care
Printing & Packaging
Flame Rating: UL 94 5VB
UL 94 V0
UL 94 V1
Technology: Plastics
Additives Included: Flame Retardant
Material Features: Chemical Resistant
Flame Retardant
Good Flow
Good UV Stability
Good Weather Stability
High Flow
High Flowability
High Impact Performance
Country Availability: Canada
China (Mainland)
Mexico
USA
Certifications and Compliance: UL 94
Plastics and Elastomers End Uses: Automotive Applications
Automotive Interior Parts
Cell Phones
Clinical Diagnostics
Computer Components
Connectors
Consumer Applications
Containers
Plastics and Elastomers Functions: Resin

Technical data

Table 1 of 6

7 rows

Characteristic	Value	Unit	Method
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	63	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	42	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	4	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	65	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2480	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	89	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2240	MPa	ASTM D790

Table 2 of 6

3 rows

Characteristic	Value	Unit	Method
Specific Gravity ¹¹	1.2	—	ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹	0.5 - 0.7	%	SABIC method
Melt Flow Rate (at 266°C, 5.0 kgf) ¹¹	26	g/10 min	ASTM D1238

Table 3 of 6

5 rows

Characteristic	Value	Unit	Method
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	77	°C	ASTM D648
Vicat Softening Temperature (Rate B/50) ¹¹	100	°C	ASTM D1525
Relative Temperature Index (Electrical) ᵖ ¹¹	75	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	75	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	75	°C	UL 746B

Table 4 of 6

2 rows

Characteristic	Value	Unit	Method
Izod Impact (Notched, at 23°C) ¹¹	550	J/m	ASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	65	J	ASTM D3763

Table 5 of 6

14 rows

Characteristic	Value	Unit
Drying Temperature ⁷	80 - 90	°C
Drying Time ⁷	3 - 4	Hrs
Drying Time (Cumulative) ⁷	8	Hrs
Maximum Moisture Content ⁷	0.04	%
Melt Temperature ⁷	245 - 275	°C
Nozzle Temperature ⁷	245 - 275	°C
Front - Zone 3 Temperature ⁷	245 - 275	°C
Middle - Zone 2 Temperature ⁷	220 - 265	°C
Rear - Zone 1 Temperature ⁷	220 - 255	°C
Mold Temperature ⁷	60 - 80	°C
Back Pressure ⁷	0.3 - 0.7	MPa
Screw Speed ⁷	40 - 70	rpm

Table 6 of 6