LNP™ ELCRIN™ 61000EUiQ2
SABIC's Specialties Business LNP ELCRIN 61000EUiQ2 (also known as ELCRIN ER011566) is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) alloy, utilizing iQ PBT generation 2 technology with 23% post consumer recycled content. Added features of this material include: excellent low temperature impact strength, improve retention of mechanical properties under UV exposure, good surface esthetics, good chemical resistance. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Lawn & Garden
- Consumer Goods — Sports & Recreation
- Chassis & Brake
- Exterior & Body
- Interior
- Artificial Turf
- Consumer Electronics
- Displays
- Non-Food Consumer Packaging
- Applicators & Accessories
Product Families
- Recycled Polymers
- Blends & Alloys
Other characteristics
- Brand
- LNP™ ELCRIN
- Density
- 1230.0 - 1230.0 kg/m³
- Polymer Name
- PC/PBT Alloy
- Labeling Claims
Contains PCR Resin, No Added PFAS, Recyclable, Recycled, Sustainable; Contains PCR Resin; No Added PFAS; Recyclable; Recycled; Sustainable
- Melt Flow Index
- 12.0 - 12.0 g/10 min
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ¹⁷ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card. The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Personal Care
- Printing & Packaging
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Additives Included
- Impact Modifier
- UV Stabilizer
- Material Features
- Chemical Resistant
- Excellent Aesthetics
- Good Aesthetics
- Good Mechanical Properties
- Good Surface Appearance
- High Flow
- High Impact Resistance
- Impact Modified
- Country Availability
- Canada
- China (Mainland)
- Mexico
- USA
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Appliances
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Building Materials
- Cell Phones
- Commercial Appliance
- Computer Components
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield, Type I, 50 mm/min) ¹¹ | 50 | MPa | ASTM D638 |
| Tensile Stress (Break, Type I, 50 mm/min) ¹¹ | 43 | MPa | ASTM D638 |
| Tensile Strain (Yield, Type I, 50 mm/min) ¹¹ | 5 | % | ASTM D638 |
| Tensile Strain (Break, Type I, 50 mm/min) ¹¹ | 140 | % | ASTM D638 |
| Tensile Modulus (at 50 mm/min) ¹¹ | 2000 | MPa | ASTM D638 |
| Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹ | 79 | MPa | ASTM D790 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 2010 | MPa | ASTM D790 |
| Tensile Stress (Yield, 50 mm/min) ¹¹ | 50 | MPa | ISO 527 |
| Tensile Stress (Break, 50 mm/min) ¹¹ | 48 | MPa | ISO 527 |
| Tensile Strain (Yield, 50 mm/min) ¹¹ | 5 | % | ISO 527 |
| Tensile Strain (Break, 50 mm/min) ¹¹ | 146 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 1980 | MPa | ISO 527 |
Table 2 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity ¹¹ | 1.24 | — | ASTM D792 |
| Melt Flow Rate (at 250°C, 5 kgf) ¹¹ | 12 | g/10 min | ASTM D1238 |
| Density ¹¹ | 1.23 | g/cm³ | ISO 1183 |
| Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹ | 0.07 | % | ISO 62-4 |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.12 | % | ISO 62-1 |
| Melt Volume Rate (at 250°C, 5 kg) ¹¹ | 11 | cm³/10 min | ISO 1133 |
| Mold Shrinkage (flow) ᵍ ¹¹ | 0.7 | % | SABIC method |
| Mold Shrinkage (xflow) ᵍ ¹¹ | 0.8 | % | SABIC method |
Table 3 of 7
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 84 | °C | ASTM D648 |
| Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 107 | °C | ASTM D648 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 118 | °C | ASTM D1525 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 120 | °C | ASTM D1525 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ | 0.000086 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ | 0.000091 | 1/°C | ASTM E831 |
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 79 | °C | ISO 75/Af |
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 101 | °C | ISO 75/Bf |
| Relative Temperature Index (Electrical) ᵖ ¹¹ | 75 | °C | UL 746B |
| Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ | 75 | °C | UL 746B |
| Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ | 75 | °C | UL 746B |
Table 4 of 7
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Comparative Tracking Index (UL, PLC) ¹⁷ | 1 | PLC Code | UL 746A |
| Arc Resistance (Tungsten, PLC) ¹⁷ | 5 | PLC Code | ASTM D495 |
| High Voltage Arc Track Rate (PLC) ¹⁷ | 0 | PLC Code | UL 746A |
| Hot Wire Ignition (PLC 3) ¹⁷ | min. 1.5 | mm | UL 746A |
| High Ampere Arc Ignition (PLC 0) ¹⁷ | min. 1.5 | mm | UL 746A |
Table 5 of 7
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, at 23°C) ¹¹ | 740 | J/m | ASTM D256 |
| Izod Impact (Notched, at 0°C) ¹¹ | 710 | J/m | ASTM D256 |
| Izod Impact (Notched, at -40°C) ¹¹ | 420 | J/m | ASTM D256 |
| Instrumented Dart Impact Total Energy (at 23°C) ¹¹ | 58 | J | ASTM D3763 |
| Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹ | 50 | J | ASTM D3763 |
| Instrumented Dart Impact Peak Force (at 23°C) ¹¹ | 5000 | N | ASTM D3763 |
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 56 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at -40°C) ¹¹ | 46 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at 0°C) ¹¹ | 56 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 60 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at -40°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 44 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 0°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 56 | kJ/m² | ISO 179/1eA |
Table 6 of 7
14 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Temperature ⁷ | 110 | °C |
| Drying Time ⁷ | 4 - 6 | Hrs |
| Drying Time (Cumulative) ⁷ | 8 | Hrs |
| Maximum Moisture Content ⁷ | 0.02 | % |
| Melt Temperature ⁷ | 245 - 270 | °C |
| Nozzle Temperature ⁷ | 245 - 270 | °C |
| Front - Zone 3 Temperature ⁷ | 245 - 270 | °C |
| Middle - Zone 2 Temperature ⁷ | 245 - 270 | °C |
| Rear - Zone 1 Temperature ⁷ | 245 - 270 | °C |
| Mold Temperature ⁷ | 65 - 90 | °C |
| Back Pressure ⁷ | 0.3 - 0.7 | MPa |
| Screw Speed ⁷ | 50 - 80 | rpm |
Table 7 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized (94HB Flame Class Rating) ᵖ | min. 1.5 | mm | UL 94 |
| UV-light (Water exposure/immersion) ᵖ | F2 | — | UL 746C |
