LNP™ ELCRIN™ EXL8332TCC
LNP ELCRIN EXL8332TCC is based on Polycarbonate (PC) siloxane copolymer resin. Added features of this grade include: 25% Post Consumer Recycle (PCR) content, Excellent Low Temperature (-20~-30 °C) ductility in combination with Medium Flow characteristics and Excellent Processability with opportunities for shorter IM cycle times compared to standard PC. This is a general purpose product available in Transparent and Opaque colors and is an excellent candidate for a broad range of applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Lawn & Garden
- Exterior & Body
- Interior
- Artificial Turf
- Consumer Electronics
- Displays
- Non-Food Consumer Packaging
- Applicators & Accessories
- Connectors
- Switches & Relays
Product Families
- Recycled Polymers
- High Performance Thermoplastics
- Polycarbonates
Other characteristics
- Brand
- LNP™ ELCRIN
- Density
- 1190.0 - 1190.0 kg/m³
- Polymer Name
- Polycarbonate-Siloxane Copolymer
- Labeling Claims
Contains PCR Resin, No Added PFAS, Recyclable, Recycled, Sustainable; Contains PCR Resin; No Added PFAS; Recyclable; Recycled; Sustainable
- Processing Methods
- Injection Molding
- Note
⁴² Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ⁴⁹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.; ⁵⁹ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ¹² Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- Color
- Custom
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Personal Care
- Printing & Packaging
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Material Features
- Excellent Low Temperature Ductility
- Good Processability
- High Impact Resistance
- Low Temperature Impact Resistance
- Recyclable
- Country Availability
- Canada
- China (Mainland)
- Mexico
- USA
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Appliances
- Automotive Applications
- Consumer Applications
- Containers
- Displays
- Electrical Components
- Electrical/Electronic Applications
- Front Spoiler
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 8
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (1.3 mm/min, 50 mm span)⁴⁹ | 2140 | MPa | ASTM D790 |
| Flexural Modulus (2 mm/min)⁴⁹ | 2070 | MPa | ISO 178 |
| Flexural Stress at Yield (1.3 mm/min, 50 mm span)⁴⁹ | 90 | MPa | ASTM D790 |
| Flexural Stress at Yield (2 mm/min)⁴⁹ | 88 | MPa | ISO 178 |
| Tensile Modulus (1 mm/min)⁴⁹ | 2150 | MPa | ISO 527 |
| Tensile Modulus (5 mm/min)⁴⁹ | 2140 | MPa | ASTM D638 |
| Tensile Strain at Break (50 mm/min)⁴⁹ | 115 | % | ISO 527 |
| Tensile Strain at Break (Type I, 50 mm/min)⁴⁹ | 110 | % | ASTM D638 |
| Tensile Strain at Yield (50 mm/min)⁴⁹ | 6 | % | ISO 527 |
| Tensile Strain at Yield (Type I, 50 mm/min)⁴⁹ | 6 | % | ASTM D638 |
| Tensile Stress at Break (50 mm/min)⁴⁹ | 63 | MPa | ISO 527 |
| Tensile Stress at Break (Type I, 50 mm/min)⁴⁹ | 63 | MPa | ASTM D638 |
Table 2 of 8
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density⁴⁹ | 1.19 | g/cm³ | ISO 1183 |
| Melt Flow Rate (at 300°C/1.2 kgf)⁴⁹ | 12 | g/10 min | ASTM D1238 |
| Melt Volume Rate (at 300°C/1.2 kg)⁴⁹ | 11 | cm³/10 min | ISO 1133 |
| Moisture Absorption (at 23°C / 50% RH)⁴⁹ | 0.11 | % | ISO 62 |
| Mold Shrinkage - flow (3.2 mm)¹²,⁴⁹ | 0.4 - 0.8 | % | SABIC method |
| Mold Shrinkage - xflow (3.2 mm)¹²,⁴⁹ | 0.4 - 0.8 | % | SABIC method |
| Specific Gravity⁴⁹ | 1.19 | — | ASTM D792 |
| Water Absorption (at 23°C/Saturated)⁴⁹ | 0.17 | % | ISO 62-1 |
Table 3 of 8
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| CTE - flow (at -40°C to 40°C)⁴⁹ | 6.7e-05 | 1/°C | ASTM E831 |
| CTE - xflow (at -40°C to 40°C)⁴⁹ | 6.9e-05 | 1/°C | ASTM E831 |
| HDT - Unannealed (1.82 MPa, 3.2mm)⁴⁹ | 119 | °C | ASTM D648 |
| HDT/Af (1.8 MPa Flatw 80*10*4 sp=64mm)⁴⁹ | 119 | °C | ISO 75/Af |
| Vicat Softening Temperature Rate (A/50)⁴⁹ | 147 | °C | ASTM D1525 |
Table 4 of 8
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistivity⁴⁹ | min. 1E+15 | Ω | ASTM D257 |
| Volume Resistivity⁴⁹ | min. 1E+15 | Ω.cm | ASTM D257 |
Table 5 of 8
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Haze (2.54 mm)⁴⁹ | 2.2 | % | ASTM D1003 |
| Light Transmission (at 2.54 mm)⁴⁹ | 86 | % | ASTM D1003 |
Table 6 of 8
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Charpy (at 23°C, Unnotch Edgew 80*10*3 sp=62mm)⁴⁹ | NB | kJ/m² | ISO 179/1eU |
| Charpy (at 23°C, V-notch Edgew 80*10*3 sp=62mm)⁴⁹ | 66 | kJ/m² | ISO 179/1eA |
| Charpy (at -30°C, Unnotch Edgew 80*10*3 sp=62mm)⁴⁹ | NB | kJ/m² | ISO 179/1eU |
| Charpy (at -30°C, V-notch Edgew 80*10*3 sp=62mm)⁴⁹ | 34 | kJ/m² | ISO 179/1eA |
| Instrumented Dart Impact Total Energy (at 23°C)⁴⁹ | 71 | J | ASTM D3763 |
| Instrumented Dart Impact Total Energy (at -30°C)⁴⁹ | 85 | J | ASTM D3763 |
| Izod Impact - Notched (at -20°C)⁴⁹ | 690 | J/m | ASTM D256 |
| Izod Impact - Unnotched (80*10*3 +23°C)⁴⁹ | NB | kJ/m² | ISO 180/1U |
| Izod Impact - Unnotched (80*10*3 -30°C)⁴⁹ | NB | kJ/m² | ISO 180/1U |
| Izod Impact Notched (80*10*3 +23°C)⁴⁹ | 61 | kJ/m² | ISO 180/1A |
| Izod Impact Notched (80*10*3 -30°C)⁴⁹ | 46 | kJ/m² | ISO 180/1A |
| Izod Impact Notched (at 23°C)⁴⁹ | 800 | J/m | ASTM D256 |
Table 7 of 8
14 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure⁴² | 0.3 - 0.7 | MPa |
| Drying Temperature⁴² | 120 | °C |
| Drying Time (Cumulative)⁴² | 48 | Hrs |
| Drying Time⁴² | 3 - 4 | Hrs |
| Front - Zone 3 Temperature⁴² | 295 - 315 | °C |
| Maximum Moisture Content⁴² | 0.02 | % |
| Melt Temperature⁴² | 295 - 315 | °C |
| Middle - Zone 2 Temperature⁴² | 280 - 305 | °C |
| Mold Temperature⁴² | 70 - 95 | °C |
| Nozzle Temperature⁴² | 290 - 310 | °C |
| Rear - Zone 1 Temperature⁴² | 275 - 295 | °C |
| Screw Speed⁴² | 40 - 70 | rpm |
Table 8 of 8
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Glow Wire Flammability Index (at 960°C)⁵⁹ | 3 | mm | IEC 60695-2-12 |
| Glow Wire Ignitability Temperature (3.0 mm)⁵⁹ | 875 | °C | IEC 60695-2-13 |
| UL Recognized 94HB Flame Class Rating⁵⁹ | min. 0.4 | mm | UL 94 |
