LNP™ ELCRIN™ DF0036RCC
- Chemical Family
- Polycarbonate (PC)
SABIC's Specialties Business LNP ELCRIN DF0036RCC compound is based on recycled Polycarbonate (PC) resin containing 15% glass fiber. Added features of this grade include: Low Warpage, Good Ductility, Good Processability, Non-Brominated & Non-Chlorinated Flame Retardant, Light Blocking at 0.5mm, High Reflective white & opaque black. Post-Consumer Recycling (PCR) Polycarbonate content up to 50%.
Other characteristics
- Brand
- LNP™ ELCRIN
- Density
- 1330.0 - 1330.0 kg/m³
- Polymer Name
- Polycarbonate (PC)
- Labeling Claims
Bromine-free, Chlorine-free, Contains PCR Resin, Recyclable, Recycled, Sustainable; Bromine-free; Chlorine-free; Contains PCR Resin; Recyclable; Recycled; Sustainable
- Fillers Included
- Glass Fiber
- Additives Included
- Flame Retardant
- Processing Methods
- Injection Molding
- Note
ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.; ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Personal Care
- Printing & Packaging
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Material Features
- Ductile
- Flame Retardant
- Good Flow
- Good Processability
- High Ductility
- High Impact Resistance
- Low Warpage
- Non-brominated
- Country Availability
- Canada
- China (Mainland)
- Mexico
- USA
Technical data
Table 1 of 6
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.33 | g/cm³ | ISO 1183 |
| Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹ | 11 | g/10 min | ASTM D1238 |
| Mold Shrinkage (flow) ᵍ ¹¹ | 0.3 | % | SABIC method |
| Mold Shrinkage (xflow) ᵍ ¹¹ | 0.3 | % | SABIC method |
| Water Absorption (at 23°C, 24hrs) ¹¹ | 0.1 | % | ISO 62-1 |
| Melt Volume Rate (at 300°C, 1.2 kg) ¹¹ | 9 | cm³/10 min | ISO 1133 |
| Specific Gravity ¹¹ | 1.34 | — | ASTM D792 |
Table 2 of 6
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (at 1 mm/min) ¹¹ | 4480 | MPa | ISO 527 |
| Tensile Stress (Yield, 5 mm/min) ¹¹ | 73 | MPa | ISO 527 |
| Tensile Stress (Break, 5 mm/min) ¹¹ | 71 | MPa | ISO 527 |
| Tensile Strain (Yield, 5 mm/min) ¹¹ | 2.5 | % | ISO 527 |
| Tensile Strain (Break, 5 mm/min) ¹¹ | 2.8 | % | ISO 527 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 4650 | MPa | ISO 178 |
| Flexural Stress (Yield, at 2 mm/min) ¹¹ | 125 | MPa | ISO 178 |
| Tensile Modulus (at 5 mm/min) ¹¹ | 4460 | MPa | ASTM D638 |
| Tensile Stress (Yield, Type I, 5 mm/min) ¹¹ | 73 | MPa | ASTM D638 |
| Tensile Stress (Break, Type I, 5 mm/min) ¹¹ | 69 | MPa | ASTM D638 |
| Tensile Strain (Yield, Type I, 5 mm/min) ¹¹ | 2.6 | % | ASTM D638 |
| Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 3.3 | % | ASTM D638 |
Table 3 of 6
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 120 | °C | ISO 75/Af |
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 1.26E+02 | °C | ISO 75/Bf |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 127 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 128 | °C | ASTM D1525 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 129 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 130 | °C | ASTM D1525 |
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 120 | °C | ASTM D648 |
| Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹ | 125 | °C | ASTM D648 |
| Coefficient of Thermal Expansion (at 23°C to 50°C, flow) ¹¹ | 0.000031 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at 23°C to 50°C, xflow) ¹¹ | 0.000084 | 1/°C | ASTM E831 |
| Relative Temperature Index (Electrical) ᵖ ¹¹ | 80 | °C | UL 746B |
| Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ | 80 | °C | UL 746B |
Table 4 of 6
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 6 | kJ/m² | ISO 180/1A |
| Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ | 30 | kJ/m² | ISO 180/1U |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 5 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | 36 | kJ/m² | ISO 179/1eU |
| Izod Impact (Notched, at 23°C) ¹¹ | 64 | J/m | ASTM D256 |
| Izod Impact (Unnotched, at 23°C) ¹¹ | 480 | J/m | ASTM D4812 |
| Instrumented Dart Impact Total Energy (at 23°C) ¹¹ | 20 | J | ASTM D3763 |
| Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹ | 17 | J | ASTM D3763 |
| Instrumented Dart Impact Peak Force (at 23°C) ¹¹ | 2500 | N | ASTM D3763 |
Table 5 of 6
11 rows| Characteristic | Value | Unit |
|---|---|---|
| Drying Time ⁷ | 4 - 6 | Hrs |
| Drying Time ⁷ | 110 | Hrs |
| Maximum Moisture Content ⁷ | 0.02 | % |
| Melt Temperature ⁷ | 285 - 310 | °C |
| Rear - Zone 1 Temperature ⁷ | 260 - 280 | °C |
| Middle - Zone 2 Temperature ⁷ | 270 - 290 | °C |
| Front - Zone 3 Temperature ⁷ | 280 - 300 | °C |
| Nozzle Temperature ⁷ | 285 - 305 | °C |
| Mold Temperature ⁷ | 80 - 110 | °C |
| Back Pressure ⁷ | 0.1 - 0.3 | MPa |
| Screw Speed ⁷ | 30 - 90 | rpm |
Table 6 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized (94V-0 Flame Class Rating) ᵖ | min. 1.5 | mm | UL 94 |
