THERMLfilm® THT™ 9003
THERMLfilm® THT™ 9003 is a durable thermal transfer printable topcoat that allows for printability at 600 DPI for high-density barcodes like data matrix codes while maintaining consistent ANSI scannability. Permanent pressure-sensitive adhesive bonds well to standard PCBs, and the adhesive has a low outgassing rate.
Product families
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Brand
- THERMLfilm
- Product Type
- Tape
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Printing & Packaging
- Benefits
1 mil polyimide film withstands intermittent heat up to 750°F (398°C) and endures wave solder and printed circuit board cleaning environments; Tested and approved for leaded and lead free reflow (top and bottom) in the wave solder environment; Available on a variety of liners to meet your specific application and dispensing; requirements (9002 with 50 lb. glassine and 9003 with 1.5 mil polyester); Halogen free; REACH and RoHS compliant; Thermal transfer printable (resin ribbons); UL/cUL Recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component
- Compliance
RoHS - Restriction of Hazardous Substances (EU Directives 2002/95/EC and 2003/11/EC): None of the substances named in these directives are knowingly used or intentionally added during the manufacturing process REACH - Registration, Evaluation and Authorization of Chemicals SVHC - Substances of Very High Concern (EU Directive 1907/2006/EC):None of the substances currently on the Candidate List are knowingly used or intentionally added during the manufacturing process Halogen Free IEC 61249-2-21: Halogens are not knowingly used or intentionally added during the manufacturing process
- Technology
- Ready-to-Use Products
- Storage Stability
Two years when stored at 70°F (21°C) and 50% relative humidity Minimum Application Temperature: Room temperature (65°F/18°C) is recommended
- UL/cUL Recognized
Under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component UL/cUL Recognized Ribbons: UL/cUL: Dia Nippon R510HF, iimak SP575, ITW Coding Products 7993, Ricoh B110CR, and Armor AXR 1 UL only: ITW Thermal Films B814
- Special Considerations
All surfaces should be clean, dry and free of any surface contamination. IPA is the recommended cleaning solution.; We recommend exposing printed labels to high heat (302°F/150°C) prior to performance testing.; The printed surface should not be touched while hot. The resin TTR will be soft and will smudge or remove.; Test data is based on Laboratory test structure. Actual application testing should be done to confirm suitability for application.
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Film | 1.0 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Coating | 0.6 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Adhesive | 1.45 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Liner - 50 Glassine | 2.7 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Liner - 150 Polyester | 1.4 | mils | ASTM D 3652 (Modified for use with non-tape products) |
