THERMLfilm® THT™ 9001
THERMLfilm® THT™ 9001 is a durable thermal transfer printable topcoat that allows for printability at 600 DPI for high-density barcodes like data matrix codes while maintaining consistent ANSI scannability. Permanent pressure-sensitive adhesive adheres well to standard PCBs, and the adhesive has a low outgassing rate.
Product families
Applications
- Automotive & Transportation — Other Automotive & Transportation Applications; Consumer Goods — Other Consumer Goods Applications
- Equipment & Parts
- Consumer Electronics
- Medical Devices & Assemblies
- Printed Circuit Boards (PCBs)
- Tapes & Labels
- Aerospace & Aviation
Product Families
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Brand
- THERMLfilm
- Product Type
- Tape
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Printing & Packaging
- Benefits
2 mil polyimide film withstands intermittent heat up to 750°F (398°C) and endures wave solder and printed circuit board cleaning environments; Tested and approved for leaded and lead free reflow (top and bottom) in the wave solder environmentAvailable on a variety of liners to meet your specific application and dispensing; requirements (9000 with 50 lb. glassine and 9001 with 1.5 mil polyester); Halogen free; REACH and RoHS compliant; Thermal transfer printable (resin ribbons); UL/cUL Recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component
- Technology
- Ready-to-Use Products
- Storage Stability
Two years when stored at 70°F (21°C) and 50% relative humidity Minimum Application Temperature: Room temperature (65°F/18°C) is recommended
- UL/cUL Recognized
Under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component UL/cUL Recognized Ribbons: UL/cUL: Dia Nippon R510HF, iimak SP575, ITW Coding Products 7993, Ricoh B110CR, and Armor AXR 1 UL only: ITW Thermal Films B814
- Compliance and Content
RoHS - Restriction of Hazardous Substances (EU Directives 2002/95/EC and 2003/11/EC): REACH - Registration, Evaluation and Authorization of Chemicals SVHC - Substances of Very High Concern (EU Directive 1907/2006/EC): Halogen Free IEC 61249-2-21:
- Special Considerations
All surfaces should be clean, dry and free of any surface contamination. IPA is the recommended cleaning solution.; We recommend exposing printed labels to high heat (302°F/150°C) prior to performance testing.; The printed surface should not be touched while hot. The resin TTR will be soft and will smudge or remove.; Test data is based on Laboratory test structure. Actual application testing should be done to confirm suitability for application.
- Printed Circuit Board - Printability
- ▲ITW Thermal Films B814 is UL only
- Printed Circuit Board - Processing Results
- Rating
- 4 = Passes 4 cleanings PR = Print Removal NT = Not Tested ♦Dia Nippon R510HF ribbon is recommended for non-reflow applications ▲ITW Thermal Films B814 is UL only *ATRON®,, HYDRON® , and VIGON® are registered trademarks of ZESTRON Americas **Aquanox® is a registered trademark of KYZEN
- Rating
- 4 = Passes 4 Cleanings PR = Print Removal NT = Not Tested
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Film | 2.0 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Coating | 0.6 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Adhesive | 1.45 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Liner - 50 Glassine | 2.7 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Liner - 150 Polyester | 1.4 | mils | ASTM D 3652 (Modified for use with non-tape products) |
