THERMLfilm SELECT® 10852
THERMLfilm SELECT® 10852 is a layered polyester that is resistant to temperature extremes, abrasion, and chemical exposure for maximum label protection. When printed with resin or wax/resin thermal transfer ribbons, topcoat resists smudging and abrasion.
Product families
Applications
- Automotive & Transportation — Other Automotive & Transportation Applications; Consumer Goods — Other Consumer Goods Applications
- Equipment & Parts
- Textile Manufacturing
- Flexography
- Offset & Lithographic Printing
- Screen Printing
- Tapes & Labels
- Rail & Mass Transit
Product Families
- Pressure Sensitive Adhesives & Tapes
Other characteristics
- Brand
- THERMLfilm SELECT
- Product Type
- Tape
- Markets
- Automotive & Transportation
- Consumer Goods
- Industrial
- Printing & Packaging
- Storage
- Expected Exterior Life
- Two years
- Storage Stability
- Two years when stored at 70°F (21°C) and 50% relative humidity.
- Benefits
1.0 mil clear polyester film provides excellent clarity and label protection; Permanent, pressure-sensitive acrylic bonds well to base film label substrates; Overlaminating adhesive offers excellent wetout and clarity; Backed with a 44 lb. polycoated natural Kraft release liner ideal for roll-form converting; Smooth, polycoated release liner provides good adhesive wetout for clarity of graphics; UL recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component; CSA accepted with specific thermal transfer ribbon(s) and printer(s) under CSA standard C22.2 No. 0.15-95; CSA accepted under CSA File No. 99214
- Technology
- Ready-to-Use Products
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Thickness Film | 1.0 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Thickness Adhesive | 0.8 - 0.9 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Thickness Liner | 3.0 | mils | ASTM D 3652 (Modified for use with non-tape products) |
| Dimensional Stability (%, Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C) | No Shrinkage Observed | — | — |
