To catalogue
Nizhnekamskneftekhim High-Impact Polystyrene 825М
- Chemical Family
- High-Impact Polystyrene (HIPS)Styrenics
Nizhnekamskneftekhim High-Impact Polystyrene 825М is an high impact polystyrene is produced by bulk block copolymerization of styrene and butadiene rubber. It is used for manufacture of industrial packaging by thermoforming and for extrusion molding of multilayer profile sheets. It is used for thin wall extrusion.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics; Consumer Goods — Housewares; Consumer Goods — Other Consumer Goods Applications
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Paints & Coatings — Industrial Coatings
- Appliances & Consumer Goods
Electrical & Electronics — Parts & Components
- Housings & Enclosures
Product Families
Plastics — Basic Thermoplastics
- Styrenics
Other characteristics
- Polymer Name
- High Impact Polystyrene (HIPS)
- Melt Flow Index
- 6.0 - 9.0 g/10 min
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Electrical & Electronics
- Paints & Coatings
- Storage
In closed room on shelves or pallets, at a distance of minimum 5 cm above the floor and at a distance of minimum 1 m from the space heaters, in conditions, excluding direct sunlight effect.
- PACKAGING
- Polyethylene bags, in bulk by polymer trucks.
- Technology
- Plastics
- Packaging Type
- Bags
- Material Features
- High Gloss
- Impact Resistance
- Plastics and Elastomers End Uses
- Appliance Components
- Appliances
- Electrical/Electronic Applications
- Household Goods
- Housewares
- Housings
- Toys
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt flow rate at 200°С per 5 kg of Load | 7.5±1.5 | g/10min | ASTM D 1238 |
| Vicat softening temperature | min.84 | °С | ASTM D 1525 |
| Tensile strength | min.17 | MPa | ASTM D638 |
| Elongation at Break | min.40 | % | ASTM D638 |
| Izod Impact Strength, Notched | min.96 | J/m | ISO 180 |
| Flexural Strength | min.37 | MPa | ASTM D790 |
| Gloss at 60° | min.65 | — | ASTM D523 |
| Residual Styrene Mass Fraction | max. 0.05 | wt% | para. 4.10 TU |
