Nizhnekamskneftekhim High-Impact Polystyrene 740M

Chemical Family: High-Impact Polystyrene (HIPS)Styrenics

Nizhnekamskneftekhim High-Impact Polystyrene 740M is an high impact polystyrene is intended for injection molding and extrusion applications. The polymer is used for fast cycle injection molding of parts for household and electronic appliances.

Properties

Physical Form: Pellets
Solid

Product families

Applications

Consumer Goods — Appliances & Electronics; Consumer Goods — Housewares; Electrical & Electronics — Other Electrical & Electronics Applications

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Other Devices & Assemblies

Paints & Coatings — Industrial Coatings

Appliances & Consumer Goods

Electrical & Electronics — Parts & Components

Other Parts & Components

Product Families

Plastics — Basic Thermoplastics

Styrenics

Other characteristics

Polymer Name: High Impact Polystyrene (HIPS)
Melt Flow Index: 1.5 - 5.0 g/10 min
Processing Methods: Extrusion
Markets: Consumer Goods
Electrical & Electronics
Paints & Coatings
Storage: In closed room on shelves or pallets, at a distance of minimum 5 cm above the floor and at a distance of minimum 1 m from the space heaters, in conditions, excluding direct sunlight effect.
PACKAGING: Polyethylene bags, in bulk by polymer trucks.
Technology: Plastics
Packaging Type: Bags
Plastics and Elastomers End Uses: Appliance Components
Appliances
Electrical/Electronic Applications
Household Goods
Housewares
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Extrusion

Technical data

Table 1 of 1

7 rows

Characteristic	Value	Unit	Method
Melt flow rate at 200°С per 5 kg of Load	1.5-5.0	g/10min	ASTM D 1238
Vicat softening temperature	min.85	°С	ASTM D 1525
Tensile strength	min.18	MPa	ASTM D638
Elongation at Break	min.15	%	ASTM D638
Izod Impact Strength, Notched	min.20	J/m	ISO 180
Flexural Strength	min.40	MPa	ASTM D790
Residual Styrene Mass Fraction	max. 0.05	wt%	para. 4.10 TU