To catalogue
Nizhnekamskneftekhim High-Impact Polystyrene 740
- Chemical Family
- High-Impact Polystyrene (HIPS)Styrenics
Nizhnekamskneftekhim High-Impact Polystyrene 740 is a general purpose molding grade with high melt flow rate, intended for manufacture of parts for small and big household and electronic appliances.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics; Consumer Goods — Housewares; Electrical & Electronics — Other Electrical & Electronics Applications
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
- Other Devices & Assemblies
Paints & Coatings — Industrial Coatings
- Appliances & Consumer Goods
Electrical & Electronics — Parts & Components
- Other Parts & Components
Product Families
Plastics — Basic Thermoplastics
- Styrenics
Other characteristics
- Polymer Name
- High Impact Polystyrene (HIPS)
- Melt Flow Index
- 3.0 - 5.0 g/10 min
- Processing Methods
- Extrusion, Injection Molding
- Markets
- Consumer Goods
- Electrical & Electronics
- Paints & Coatings
- Storage
In closed room on shelves or pallets, at a distance of minimum 5 cm above the floor and at a distance of minimum 1 m from the space heaters, in conditions, excluding direct sunlight effect.
- PACKAGING
- Polyethylene bags, in bulk by polymer trucks.
- Technology
- Plastics
- Packaging Type
- Bags
- Plastics and Elastomers End Uses
- Appliance Components
- Appliances
- Electrical/Electronic Applications
- Household Goods
- Housewares
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Molding
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt flow rate at 200°С per 5 kg of Load | 4.0±1.0 | g/10min | ASTM D 1238 |
| Vicat softening temperature | min.85 | °С | ASTM D 1525 |
| Tensile strength | min.18 | MPa | ASTM D638 |
| Elongation at Break | min.20 | % | ASTM D638 |
| Elongation at Break | min.15 | % | ASTM D638 |
| Izod Impact Strength, Notched | min.40 | J/m | ISO 180 |
| Izod Impact Strength, Notched | min.50 | J/m | ISO 180 |
| Flexural Strength | min.40 | MPa | ASTM D790 |
| Gloss at 60° | min.60 | — | ASTM D523 |
| Residual Styrene Mass Fraction | max. 0.05 | wt% | para. 4.10 TU |
