To catalogue
Safron® H510 - 02
- Chemical Family
- PolyolefinsPolypropylenes (PP)
Safron® H510 - 02 polypropylene resin is suitable for extrusion, general purpose injection and blow molding. It offers good processability and low water carry-over, as required when water baths are used during processing. Safron® H510-02 Polypropylene Resin offers good tenacity and low fibrillation.
Product families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Brand
- Safripol Safron
- Polymer Name
- Polypropylene Homopolymer (HPP)
- Melt Flow Index
- 2.0 - 2.0 g/10 min
- Processing Methods
- Blow Molding, Extrusion, Injection Molding
- Markets
- Building & Construction
- Consumer Goods
- Industrial
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Material Features
- Food Contact Acceptable
- Good Tenacity
- Food Contact Compliance
Safrene® H510 - 02 Polyethylene Resin should comply with Commission Regulation (EU) No 10/2011 and with U.S. FDA 21 CFR 177.1520(c)3.2a food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. The purchaser remains responsible for determining whether the use complies with all relevant regulations.
- Certifications and Compliance
- FDA 21 CFR 177.1520
- Regulation (EU) No. 10/2011 (PIM)
- Plastics and Elastomers End Uses
- Caps
- Closures
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Blow Molding
- Extrusion
- Injection Molding
Technical data
Table 1 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (230 °C/ 2.16 kg) | 2 | g/10min | ISO 1133 |
| Density | 0.9 | g/cm3 | ISO 1183 |
Table 2 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Yield | 31 | MPa | ISO 527 |
| Elongation at Yield | 8.5 | % | ISO 527 |
| Flexural Modulus | 1360 | MPa | ISO 178 |
| Charpy Notched Impact Strength (23 °C) | 6.8 | kJ/m2 | ISO 179 |
Table 3 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature - HDT A (1.8 MPa) | 53 | °C | ISO 75/A |
| Heat Deflection Temperature - HDT B (0.45 MPa) | 85 | °C | ISO 75/B |
| Vicat Softening Point B (50 N) | 90 | °C | ISO 306/B |
