ADNYL® TP‐15138
ADNYL® TP‐15138 is a nylon‐polyethylene alloy, which has easy processability like polyolefins. It can be used as top layer in a 3‐layer co‐extruded blown film structure
Product families
- Blends & Alloys
Other characteristics
- Brand
- ADNYL
- Density
- 1050.0 - 1050.0 kg/m³
- Polymer Name
- Nylon/Polyethylene Alloy
- Tensile Strength
- 2.1 - 2.1 MPa
- Processing Methods
- Extrusion
- Note
Film properties were measured on 75 micron, 3 layer film with structure : Nylon alloy TP‐15138 (Outer)/ BindEX E‐189 + LLDPE (45:55) (Middle‐ Tie‐layer)/ PE (Inner‐sealant layer).; The above information is based on trials done to establish processability of the material in co-extrusion.; Depending on end application, Nylon alloy composition can be tailor made to meet requirements of film making, conversion and product performance.
- Features
ADNYL® TP‐15138 can be extruded like PE, using a normal PE extruder.; Due to highly polar nature of the top layer, surface energy of this untreated film is greater than 36 dynes/cm.; It can be further enhanced by corona treatment.; The film is thus highly suitable for surface printing applications.; Compared to normal 3‐layer PE films, film with ADNYL® TP‐15138 as one of the layers will have superior gas and aroma barrier capability.
- Technology
- Plastics
- Material Features
- Aroma Barrier
- Easier Processing
- Gas Barrier
- Non-Hygroscopic
- Usage
ADNYL® TP‐15138 can be used as top layer in a 3‐layer co‐extruded blown film structure such as :
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ASTM D792 |
| MFI (at 230°C/2.16Kg) | 0.8 | g/10min | ASTM D1238 |
| Dart Impact | 450 | g | — |
| Coefficient of Friction | 0.21 | — | — |
Table 2 of 2
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (MD) | 2.1 | MPa | ASTM D638/2010 |
| Tensile Strength (ID) | 2.1 | MPa | ASTM D638/2010 |
| Elongation (MD) | 470 | % | — |
| Elongation (TD) | 480 | % | — |
| Dyne Level | min. 36 | Dynes | — |
