OPTIM® E-142

Other characteristics

Brand

OPTIM

Carrier

• Low-Density Polyethylene (LDPE), Resin-based
• Low-Density Polyethylene (LDPE)
• Resin-based

Features

Good Adhesion, Non-Hygroscopic

Functions

Compatibilizer, Impact Modifier

Compatible Polymers & Resins

Polyamide 6 (PA 6), Polyamides, Polyethylenes (PE)

Markets

Electrical & Electronics

Technology

Plastics

Packaging Type

• Bags
• Super Sacks

Material Features

• Good Adhesion
• Non-Hygroscopic

Packaging Information

OPTIM® speciality polymers are supplied in pre-dried form in 25 Kg (55 lbs) PE lined, HD woven sack-laminated paper bags and 750 Kg (1650 lbs) FIBC's.. They should be stored in cool and dry place.

Processing Conditions

OPTIM® E-142 can be added to nylons to achieve good dispersion of fillers within the polymer matrix thereby obtaining best properties.; Maximum processing temperature should not generally exceed 290°C.; At temperatures above 290°C, these specialty polymers can evolve low concentrations of fumes.; If overheated, more extensive decomposition may occur due to exposure of overheated polymers to atmospheric oxygen.; Adequate local ventilation should be provided to remove the fumes from the work area under such conditions.

Show in full

Compatible Polymers and Resins

• Polyamide 6 (PA 6)
• Polyamides
• Polyethylenes (PE)

Plastics and Elastomers End Uses

Cables

Plastics and Elastomers Functions

• Compatibilizer
• Impact Modifier

Storage and Handling Procedures

OPTIM® E-142 should be stored in a dry, cool and well-ventilated area.. It is recommended that prior to processing, the requisite quantity of material to be used should be dried in a hopper dryer or oven at 80-95 °C for about 2 hours for obtaining best results.