Pluss Advanced Technologies MB-80
MB-80 is an adhesive resin based on modified polyethylene. It can be used to produce a three-layer low temperature adhesive film, for manufacture of Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer with MB-80, which faces aluminum sheet during ACP manufacturing process. It can be processed on normal extruders used for making 3-layer polyethylene films.
Properties
- Physical Form
- Masterbatch
- Solid
Product families
- Functional Additives
- Additive Masterbatches
- Surface Modifiers
Other characteristics
- Carrier
- Polyethylenes (PE), Resin-based
- Polyethylenes (PE)
- Resin-based
- Functions
- Adhesion Promoter
- Processing Methods
- Extrusion
- Compatible Polymers & Resins
- Polyethylenes (PE)
- Applications
- Metal Adhesion layer in 3-layer film structure.
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Super Sacks
- Material Features
- Good Adhesion
- Non-Hygroscopic
- Packaging Information
BindEX speciality polymers are supplied in pre-dried form in 25 Kg (55 lbs) PE lined, HD woven sack-laminated paper bags and 500 Kg (1102 lbs) FIBC's.. They should be stored in cool and dry place.
- Processing Conditions
MB-80 can be processed on most standard extrusion equipment, designed to process conventional polyolefins.. Maximum processing temperature should not exceed 230°C.
- Compatible Polymers and Resins
- Polyethylenes (PE)
- Composite Materials Functions
- Adhesion Promoter
- Plastics and Elastomers Functions
- Adhesion Promoter
- Storage and Handling Procedures
MB-80 should be stored in a dry, cool and well-ventilated area protected from UV-light.. Improper storage conditions may cause degradation and thus can adversely affect the physical properties and performance of the product.
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| MFI (at 190C/2.16 Kg) | 1.37 | g/10min | ASTM D1238 |
| Density | 0.932 | g/cm³ | ASTM D792 |
| Bonded Maleic Anhydride | Medium high | — | PLUSS® method |
| Al Adhesion Strength | min. 4.0 | Kg/25mm | PLUSS® method |
| Process Temperature | 150 - 180 | °C | PLUSS® method |
