BindEX E-186
BindEX E-186 is a maleic anhydride modified metallocene based linear low density polyethylene. With advanced anhydride grafting technology, this grade creates superb adhesion to EVOH, PA and PE, while maintaining excellent process ability.
Properties
- Physical Form
- Masterbatch
- Solid
Product families
- Functional Additives
- Additive Masterbatches
- Surface Modifiers
Other characteristics
- Brand
- BindEX
- Carrier
Metallocene Linear Low Density Polyethylene (mLLDPE)
- Functions
- Adhesion Promoter
- Processing Methods
- Coextrusion, Extrusion
- Compatible Polymers & Resins
Ethylene Vinyl Alcohol (EVOH), Polyamides, Polyethylene Terephthalate (PET), Polyethylenes (PE), Polypropylenes (PP)
- Applications
This has been specifically designed for co-extrusion coating/lamination on barrier materials like, PET, nylon or aluminum for PE and PP based structures in Lamitubes.. It has to be used without dilution.
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Super Sacks
- Material Features
- Good Adhesion
- Non-Hygroscopic
- Packaging Information
BindEX speciality polymers are supplied in pre-dried form in 25 Kg (55 lbs) PE lined, HD woven sack-laminated paper bags and 750 Kg (1650 lbs) FIBC's.. They should be stored in cool and dry place.
- Processing Conditions
BindEX E-186 can be processed on most of the standard extrusion equipment designed to process conventional polyolefins.; Maximum processing temperature should not generally exceed 280°C.; At temperatures above 280°C, these speciality polymers can evolve low concentrations of fumes.; If overheated, more extensive decomposition may occur due to exposure of overheated polymers to atmospheric oxygen.; Adequate local ventilation should be provided to remove the fumes from the work area.
- Compatible Polymers and Resins
- Ethylene Vinyl Alcohol (EVOH)
- Polyamides
- Polyethylene Terephthalate (PET)
- Polyethylenes (PE)
- Polypropylenes (PP)
- Composite Materials Functions
- Adhesion Promoter
- Plastics and Elastomers Functions
- Adhesion Promoter
- Storage and Handling Procedures
BindEX E-186 is mildly hygroscopic and should be stored in a dry, cool and well-ventilated area.; It is supplied in pre-dried moisture proof bags and thus no need to dry prior to processing.; In case of open bags, it is recommended that prior to processing, the requisite quantity of material to be used should be dried in a hopper dryer or oven at 80-90°C for about 2 hours for obtaining best results.
- Plastics and Elastomers Processing Methods
- Coextrusion
- Extrusion
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| MFI (at 190°C/2.16 Kg) | 2 | g/10min | ASTM D1238 |
| Density | 0.932 | g/cm³ | ASTM D792 |
| Bonded Maleic Anhydride | Low | — | PLUSS® method |
