BindEX E-190
BINDEX E-190 is a maleic anhydride modified metallocene based polyethylene. With advanced anhydride grafting technology, this grade is used to combine multilayer structures involving Nylon 6, Nylon 66, or EVOH for gas barrier properties with variety of HDPE, LLDPE and LDPE grades for functions like, moisture barrier, sealability etc.
Properties
- Physical Form
- Masterbatch
- Solid
Product families
- Additive Masterbatches
- Surface Modifiers
Other characteristics
- Brand
- BindEX
- Carrier
- Polyethylenes (PE), Resin-based
- Polyethylenes (PE)
- Resin-based
- Features
Excellent Seal Properties, Moisture Barrier, Non-Hygroscopic
- Functions
- Adhesion Promoter
- Processing Methods
- Coextrusion, Extrusion
- Compatible Polymers & Resins
Ethylene Vinyl Alcohol (EVOH), High-Density Polyethylene (HDPE), Linear Low Density Polyethylene (LLDPE) , Low-Density Polyethylene (LDPE), Polyamide 6 (PA 6), Polyamide 66 (PA 66)
- Applications
Maleic anhydride groups chemically react with amine groups of PA or hydroxyl groups of EVOH, while polyethylene part adheres naturally with polyethylene on the other side, thus giving a composite structure.; Designed to use as a tie layer resin in conventional extrusion and co-extrusion equipments for making multilayer tubes.; Can be used in its pure form as well as in diluted form, depending on the inter-layer adhesion required in the end-application.; Recommended dilution is 25 – 50% by using similar MFI HDPE.
- Technology
- Plastics
- Packaging Type
- Bags
- Super Sacks
- Material Features
- Excellent Seal Properties
- Moisture Barrier
- Non-Hygroscopic
- Packaging Information
BindEX speciality polymers are supplied in pre-dried form in 25 Kg (55 lbs) PE lined, HD woven sack-laminated paper bags and 750 Kg (1650 lbs) FIBC's.. They should be stored in cool and dry place.
- Processing Conditions
BindEX E-190 can be processed on most of the standard extrusion equipments designed to process conventional polyolefins.; Maximum processing temperature should not exceed 280°C.; At temperatures above 280°C, these speciality polymers can evolve low concentrations of fumes.; If overheated, more extensive decomposition may occur due to exposure of overheated polymers to atmospheric oxygen.; Adequate local ventilation should be provided to remove the fumes from the work area.
- Compatible Polymers and Resins
- Ethylene Vinyl Alcohol (EVOH)
- High-Density Polyethylene (HDPE)
- Linear Low Density Polyethylene (LLDPE)
- Low-Density Polyethylene (LDPE)
- Polyamide 6 (PA 6)
- Polyamide 66 (PA 66)
- Plastics and Elastomers Functions
- Adhesion Promoter
- Storage and Handling Procedures
BindEX E-190 is mildly hygroscopic and should be stored in a dry, cool and well-ventilated area.; It is supplied in pre-dried moisture proof bags and thus no need to dry prior to processing.; In case of open bags, it is recommended that prior to processing, the requisite quantity of material to be used should be dried in a hopper dryer or oven at 80-90°C for about 2 hours for obtaining best results.
- Plastics and Elastomers Processing Methods
- Coextrusion
- Extrusion
Technical data
Table 1 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Break | 15 | MPa | ASTM D638/2010 |
| Elongation at Break | 700 | % | ASTM D638/2010 |
| Tensile Modulus | 29 | MPa | ASTM D638/2010 |
Table 2 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| MFI (at 190°C/2.16 Kg) | 1.3 | g/10min | ASTM D1238 |
| Bonded Maleic Anhydride | Medium | — | PLUSS® method |
| Yellowness Index | 3 | — | ASTM E-313 |
Table 3 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperafure | 114 | °C | DSC |
Table 4 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Durometer Hardness | 45 | Shore D | ASTM D2240/ISO868 |
| Durometer Hardness | 96 | Shore A | ASTM D2240 |
