OPTIM® E-156
OPTIM® E-156 is a maleic anhydride modified high density polyethylene. It is used for a variety of applications where adhesion improvements or compatibilsation is required.
Properties
- Physical Form
- Masterbatch
- Solid
Product families
Applications
- Jacketing & Insulation
Product Families
- Functional Additives
- Additive Masterbatches
- Performance Additives
- Surface Modifiers
Other characteristics
- Brand
- OPTIM
- Carrier
- High-Density Polyethylene (HDPE), Resin-based
- High-Density Polyethylene (HDPE)
- Resin-based
- Functions
- Coupling Agent
- Processing Methods
- Extrusion
- Compatible Polymers & Resins
- High-Density Polyethylene (HDPE)
- Markets
- Electrical & Electronics
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Super Sacks
- Material Features
- Excellent Compatibility
- Good Adhesion
- Non-Hygroscopic
- Packaging Information
OPTIM® speciality polymers are supplied in pre-dried form in 25 Kg (55 lbs) PE lined, HD woven sack-laminated paper bags and 750 Kg (1650 lbs) FIBC's.. They should be stored in cool and dry place.
- Processing Conditions
A slight pungent order is normal during processing of OPTIM® E-156.; During processing, the compounding parameters that can lead to optimized performance include extruder type, screw design, barrel temperature, screw speed, throughput, residence time and material feeding sequence.; Maximum processing temperature should not generally exceed 280°C.
- Compatible Polymers and Resins
- High-Density Polyethylene (HDPE)
- Composite Materials Functions
- Coupling Agent
- Plastics and Elastomers End Uses
- Cables
- Plastics and Elastomers Functions
- Coupling Agent
- Storage and Handling Procedures
OPTIM® E-156 should be stored away from heat, sparks and flame.; It should be kept in a cool, dry & well ventilated place.; It is recommended that prior to processing, the requisite quantity of material to be used should be dried in a hopper dryer or oven at 80-95°C for about 2 hours for obtaining best results.
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 11 | MPa | ASTM D638/2010 |
| Percentage Elongation | 10 | % | ASTM D638/2010 |
| Tensile Modulus | 50 | MPa | ASTM D638/2010 |
| Flexural Modulus | 670 | MPa | ASTM D790/2010 |
| Flexural Strength | 20 | MPa | ASTM D790/2010 |
Table 2 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature | 129 | °C | DSC |
| Vicat Softening Temperature | 121 | °C | ASTM 1525/2010 |
Table 3 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| MFI (at 190°C/2.16 Kg) | 7 | g/10min | ASTM D1238 |
| Density | 0.953 | g/cm³ | ASTM D792 |
| Bulk Density | 0.55 | g/ml | PLUSS® method |
| Bonded Maleic Anhydride | Medium | — | PLUSS® method |
Table 4 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Durometer Hardness | 60 | Shore D | ASTM D2240/2004 |
