OPTIM® E-126

Other characteristics

Brand

OPTIM

Carrier

Linear Low Density Polyethylene (LLDPE), Resin-based; Linear Low Density Polyethylene (LLDPE); Resin-based

Features

Good Adhesion, Non-Hygroscopic

Functions

Compatibilizer, Coupling Agent, Impact Modifier

Compatible Polymers & Resins

Polyamide 6 (PA 6), Polyamide 66 (PA 66)

Markets

Electrical & Electronics

Technology

Plastics

Packaging Type

• Bags
• Super Sacks

Material Features

• Good Adhesion
• Non-Hygroscopic

Packaging Information

OPTIM® speciality polymers are supplied in pre-dried form in 25 Kg (55 lbs) PE lined, HD woven sack-laminated paper bags and 750 Kg (1650 lbs) FIBC's.. They should be stored in cool and dry place.

Processing Conditions

OPTIM® E-126 can be added to Polyamides to achieve good dispersion of fillers within the polymer matrix thereby obtaining best properties.; Maximum processing temperature should not generally exceed 290°C.; At temperatures above 290°C, these speciality polymers can evolve low concentrations of fumes.; If overheated, more extensive decomposition may occur due to exposure of overheated polymers to atmospheric oxygen.; Adequate local ventilation should be provided to remove the fumes from the work area.

Show in full

Compatible Polymers and Resins

• Polyamide 6 (PA 6)
• Polyamide 66 (PA 66)

Plastics and Elastomers End Uses

• Cables
• Wires

Plastics and Elastomers Functions

• Compatibilizer
• Coupling Agent
• Impact Modifier

Storage and Handling Procedures

OPTIM® E-126 should be stored in a dry, cool and well-ventilated area.. It is recommended that prior to processing, the requisite quantity of material to be used should be dried in a hopper dryer or oven at 80-95°C for about 2 hours for obtaining best results.