WACKER® Silicone Paste P 300
- Chemical Family
- Silicones
WACKER® Silicone Paste P 300 is an opaque paste with a medium to soft consistency and slight thixotropic properties. It possesses good electrical properties, including insulation, relative permittivity, and electric strength. Additionally, it exhibits strong adhesion to metals and ceramic materials. When applied as a coating, WACKER® Silicone Paste P 300 provides excellent water repellency, offering a certain level of protection against corrosion. The paste's low viscosity makes it easy to use as an embedding compound, release agent, or lubricant in various applications.
Properties
- Physical Form
- Liquid
- Paste
Product families
Applications
- Jacketing & Insulation
- Power Transmission & Distribution
Product Families
- Lubricants & Oils
Other characteristics
- Brand
- WACKER
- Features
Corrosion Resistant, Electrically Insulating, Excellent Lubricity, Excellent Substrate Adhesion, Excellent Water Repellency , Good Adhesion, Good Electrical Properties, Good Surface Slip, High Dielectric Strength, Soft, Thixotropic, Water Resistant
- Product Type
- Mold Release Agent
- Application Area
- Control Device, Shut-Off Valves, Wires
- Control Device
- Shut-Off Valves
- Wires
- Compatible Substrates & Surfaces
- Ceramic, Glass, Metal
- Color
- Opaque
- Transparent
- Markets
- Electrical & Electronics
- Properties
- Non-curing, with retention of pasty consistency
- Water resistant, water repellent
- Electrically insulating
- Good surface slip
- High dielectric strength
- Good adhesion to metals, glass and ceramics
- Technology
- Ready-to-Use Products
- Labeling Claims
- Odor-free
- Specific Features
- Lubricant
- Thixotropic
- Storage Information
- Store in a dry and cool place.
- Chemical Inventories
- AIIC (Australia)
- DSL (Canada)
- ENCS (Japan)
- PICCS (Phillipines)
- TCSI (Taiwan)
- TSCA (USA)
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bleeding (at 30hours, 200°C) | max. 5.0 | % | FED-STD 791 M 321 |
| Density (at 25°C) | 1 | g/cm³ | DIN EN ISO 1183-1 A |
| Dielectric Strength | 20 | kV/mm | IEC 60243-1 |
| Dissipation Factor (tan δ, at 50Hz) | 7 x 10⁻³ | — | IEC 62631-2-1 |
| Loss of Weight (at 200°C, 30 hours) | max. 3.5 | % | FED-STD 791 M 321 |
| Operating Temperature | -40 to - 150 | °C | — |
| Penetration (unworked, 150g cone, 5s penetration time) | 29 - 33 | mm | DIN ISO 2137 |
| Permittivity (at 50Hz) | 3.1 | — | IEC 62631-2-1 |
| Solidification Point | approx. -45 | °C | — |
