WACKER® Finish CT 95 E

Other characteristics

Brand

WACKER

End Uses

Textiles

Features

Easy To Use, High Durability, Water Soluble

Functions

Fabric Softener

Compatible Fibers

Wool

Markets

Industrial

Properties

WACKER® FINISH CT 95 E is particularly suitable as softener for the impregnation of fibers and textiles.; WACKER® FINISH CT 95 E imparts a very soft, smooth and elastic touch to woven and knitted fabrics.; WACKER® FINISH CT 95 E is considered to be the best softening agent for woolen goods and PES knitware.; WACKER® FINISH CT 95 E improves the wash-and-wear properties the crease recovery angle and tear strength and reduces abrasion loss. The effects are fast to washing and dry cleaning.

Show in full

Technology

Industrial Additives & Materials

Packaging Type

• Bottles
• Drums
• Totes (IBC)

Labeling Claims

Low VOC

Specific Features

Aminofunctional silicone resin with high amine level; Dilutable with water; Easy to use; Excellent durability; Low VOC; Ready to use; Water-based

Application Details

WACKER FINISH CT 95 E gives permanent effects even without the addition of a catalyst. Specific curing conditions need not be adhered to if no resins are used.; WACKER® FINISH CT 95 E can be applied either by padding or by the exhaust method but the finishing liquors should not be subjected to high shear as this might cause instability.; 5 - 30 g/l WACKER FINISH CT 95 E are recommended for the pad method. For the exhaust method 1 - 3 %, relative to the weight of goods are adequate and the treatment should be carried out at 40 - 50 °C for 15 - 20 minutes. The pH of the liquor should not exceed pH 5. It may need to be adjusted with acetic acid.; WACKER® FINISH CT 95 E can be applied either alone or together with resins and other finishing agents.; If WACKER® FINISH CT 95 E is used together with crosslinking agents and other additives, it should be added, in dilute form, after all the other products. (This recommendation applies generally to the processing of all polysiloxanes).; Higher crease recovery angles and lower abrasion values can be obtained in resin finishes by using WACKER® FINISH CT 95 E. A wide range of händles can be obtained by combining WACKER® FINISH CT 95 E with conventional softening agents and other additives.

Show in full

Storage Information

Emulsions showing signs of creaming should be agitated before use to assure uniform consistency.